Achtung: Twoja przeglądarka jest przestarzała. Z tego powodu Gunfinder może nie działać poprawnie w niektórych miejscach. Jak najszybciej zaktualizuj przeglądarkę. Dowiedz się więcej!

DAA Extra-Short Dillon Powder Bar

≈ 43 €
Cena u Dealera: 39,90 CHF. Przeliczono po kursie EBC z 16 października 2026.
Do nabycia bez pozwolenia (od 18 lat)
9200 Gossau SG, Szwajcaria
1
ID: 10786121
Zakup spoza UE: Broń przechodzi przez importera w twoim kraju, a sprzedawca zajmuje się eksportem. Tak przebiega zakup z Europy
Bezpieczne zakupy z Gunfinder
Nasze weryfikowanie tożsamości sprzedawców wspierane przez AI czyni Gunfinder najbezpieczniejszym marketplace'em online. Dowiedz się więcej
O sprzedającym
Shop Indoorswiss
Sprzedawca

Szczegóły

Język oryginalny
Niemiecki
Kategoria
Stan
Nowe
Lokalizacja
🇨🇭 9200 Gossau SG, Szwajcaria
Dostępność
ograniczona dostępność

Aktualność

Ta oferta pochodzi z synchronizacji danych, podczas której informacje o ofercie zostały przesłane do nas ze sklepu, sprzedawcy lub zewnętrznego marketplace'u. Pamiętaj, że ze względu na możliwe opóźnienia w przesyłaniu danych mogą wystąpić tymczasowe różnice w cenach.
Źródło
Shop Indoorswiss
Ostatnia aktualizacja
około 16 godzin temu

Opis

Uwaga: Przedmiot znajduje się za granicą. Pamiętaj, że warunki dostawy, czas wysyłki i/lub procedura zakupu mogą się różnić.
The DAA Extra-Short Dillon Powder Bar was developed to meet a specific need, created with the introduction of the Dillon XL750 press: In the 750, the Dillon Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. The original Dillon Powder Bar is too long, and it will extend and impact the bullet dropper in station #4, preventing correct function.
In order to resolve this problem, we designed an innovative extra-short powder bar that shortens the extension range towards station #4 by a full 30mm (1.15”), resolving the issue. When fully extended, our charge bar stops short of contacting a Mr.Bulletfeeder Dropper or Mini Mr.BF tube assembly.
The charge capacity of the Extra-Short bar is approx.. 95% of the Original Dillon small charge bar.
This design does require the use of a 2.5mm Allen key (not included) to adjust the powder charge, and the Click-Adjustable screw has 12 clicks per rotation for precise charge setting.
Made from black anodized 6061 Aluminum.

Podobne oferty