Rollsizer – Desempistonador automático, unidad base
≈ 1.825 €
Precio del vendedor: 19.990 kr. Convertido al tipo de cambio del BCE del 3 de noviembre de 2026.
Venta libre a partir de 18 años (venta libre)
254 64 Helsingborg, Suecia
0
ID: 11622258
Compra desde fuera de la UE: El arma pasa por un importador en tu país; el vendedor se encarga de la exportación.
Así funciona la compra desde Europa
Compra seguro con Gunfinder
Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online.
Más información
Detalles
- Idioma original
- Sueco
- Categoría
- Estado
- Nuevo
- Ubicación
- 254 64 Helsingborg, Suecia
- Disponibilidad
- disponible
Actualidad
Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.
- Fuente
- RangeMaster Store
- Última actualización
- hace aproximadamente 15 horas
Descripción
Nota:
El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.
With decapping soiled cases means you can wet clean your cases afterwards (including primer pockets) and this will improve your reloading press performance and reduce primer seating issues. The crud in the primer pockets is known to be a lead based material (Lead Styphenate) which has health implications and is also recognized as being a problem for automated press sensors (primer / ringer sensors).
You can mix some different cases together to decap them. Once decapped the cases can be wet cleaned. This makes the case identification and head stamps much easier to identify. (its also cleaner….).
The limitation on mixing cases is the height variation (to clear the drop tube), AND the size (it needs to fit inside the drop tube) AND ensuring the cases do not fit inside other cases. For example a 9mm case will fit inside a 40S&W case. Sorry we didn’t design the cases….
You can mix the following, 380ACP,9mm, 38S, 38SC, 357SIG. 223 and 300blk can be processed together, likewise 308, 243, 22-250, 6.5 Creedmore can be processed together.
The Decapper is supplied as standard with the following;
Decapper base unit with a 24VDC motor, gearbox and decapping guides and rails
Spare set of self-aligning pegs and spring.
FW Arms decapper body, custom guide rod (plus spare guide rod), 3 x small pins, minor tools and locktite. The FW Arms decapping unit includes (as standard), a conversion (shuttle and spring) to run rifle cases through the Decapper.
Feed hose and adaptor clip to connect to a Dillon casefeeder. (This is the same hose as supplied with the Rollsizers).
Length of clear hose to connect to the primer discharge and case discharge. (Cut to suit).
AC / DC power converter with variable speed control. The converter will be supplied with an Australian moulded plug (EU plug adaptor included). The power converter will operate off all power supplies between 100VAC >277VAC and will operate with 50hz or 60Hz frequency. The converter is IP67 rated and very high quality.
Operation and maintenance manual. Please read it thoroughly…. then read it again. A copy of the manual is available on the website. This is updated periodically.
A Perspex transparent shielding and auto-cutoff switch is added for all units sold directly by us in order to comply with EU safety regulations.
You will require a drop tube for the Decapper to work.
You can use the drop tubes from the Rollsizers (if you have one).
If not, you can order them here.
We strongly recommend you buy 2 or 3 spare sets of decapping pins these are a consumable and do break occasionally.
