Culata plegable doble Picatinny negra Strike Industries
419 €
Venta libre a partir de 18 años (venta libre)
7500 Tournai, Bélgica
0
ID: 10830545
Esta oferta no está disponible actualmente.
Compra desde fuera de la UE: El arma pasa por un importador en tu país; el vendedor se encarga de la exportación.
Así funciona la compra desde Europa
Compra seguro con Gunfinder
Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online.
Más información
Detalles
- Idioma original
- Francés
- Categoría
- Estado
- Nuevo
- Ubicación
- 7500 Tournai, Bélgica
- Disponibilidad
- no disponible
Actualidad
Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.
- Fuente
- Armurerie Billau
- Última actualización
- hace aproximadamente 14 horas
Descripción
Nota:
El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.
The Strike Folding Adapter is a patented system that is the first on the market to offer an intuitive two-sided mechanism for folding the buttstock for a Picatinny mount. This innovative model allows folding to the left or right at any time, without rotating the mount. It gives the user complete freedom of choice. The stock stays securely in place after folding, remaining stable when conducting fire.
For quick unfolding, it is enough to lift it slightly in the hinge area. The buttstock is specially designed with a 3-degree downward tilt angle, which prevents interference with the brass ejection port when folded to the right side.
The stock can be instantly detached by pressing both locking buttons simultaneously, thereby releasing the hinges. The risk of excessive play at the hinges is prevented by the included oblong rubber pads of various thicknesses. They should be glued into specially milled recesses located on the inside of the hinge.
The kit comes with two interchangeable rear ends. The first is a minimalist stabilizer type and the second is an SBR type stock equipped with a rubber buttplate. The rear ends are mounted through a Torx-type screw, accessible through the rear QD sockets, for removal of which the included wrench is used, also designed for rail mounting screws.
The frame and rail mount are made of 6061-T6 aluminum, the hinges, buttons and screws are made of steel, and the rear ends are made of polymer. Thanks to this design, the stock is lightweight, yet extremely durable. The buttstock is designed to work with a wide range of accessories, such as optional cheek pads or tactical slings hooked to the QD port. The stabilizer has one socket on the rear, the SBR stock has 3: on the rear and on both sides.
Modern materials and excellent technical solutions make the Strike Folding Adapter a unique accessory for anyone looking for a modular folding buttstock weighing less than 300 grams.
Features:
Skeletonized folding stock for rail mounting
Mounts directly to a 1913 Picatinny rail with 2 Torx screws
Pre-assembled as stabilizer and includes a separate SBR buttstock
Rear ends mounted with a single Torx screw
Patented, first Picatinny adapter on the market with double-sided folding capability and intuitive operation
Folds left or right at any time without rotating the hinge
Locks into the folded position
Comes with rubber pads of various thicknesses to adjust the tension of the hinge in the unfolded position
Designed for them are special recesses located on the inside of the mount for the hinge
To open, it is enough to raise the buttstock near the hinge, and to lock it down
A 3-degree downward angle revealing the brass ejection port in the folded position to the right side
Pressing the buttons at the same time allows quick disassembly of the stock
Single rear QD socket on stabilizer and three sockets on SBR buttstock
Non-slip rubber buttplate on the SBR stock
Steel hinge; its mounting, rails mount and frame made of 6061-T6 aluminum
Robust, modular and lightweight
Regular maintenance of the hinge and lubrication of the button components is required for proper operation
Suitable Torx wrench included
Technical data
Compatibility
1913 Picatinny rail
Strike AR Picatinny Stock Adapter
B&T APC9/45
APC223/300
GHM
Brownells BRN-180 lower receiver
CZ Bren 2
CZ Scorpion EVO pistol version with SI Stock Back Plate adapter
Galil ACE
Ruger PC Charger
SIG SAUER MCX/MPX
Mounting
Picatinny 1913
Material
Aluminum 6061-T6
Polymer
Steel
Overall length
With stabilizer: 234.,64 mm
With SBR stock: 233.14 mm
Folded: 26 mm
Dimensions with stabilizer
Length: 240.5 mm
Width: 53.05 mm
Height: 141.95 mm
Weight: 272 g
Dimensions with SBR stock
Length: 239.5 mm
Width: 53.05 mm
Height: 115.88 mm
Weight: 281 g
Weight of set
411 g
Color
Black
Kit components:
1x Strike Folding Adapter in stabilizer configuration
1x replacement SBR stock
4x Rubber pads of various thicknesses
1x Torx T25 wrench
