AEA Challenger Pro 29.5''
1.050 €
Se requiere tarjeta de armas municipal (4.ª categoría)
7665 AN Albergen, Países Bajos
0
ID: 10818671
Esta oferta no está disponible actualmente.
Compra desde fuera de la UE: El arma pasa por un importador en tu país; el vendedor se encarga de la exportación.
Así funciona la compra desde Europa
Compra seguro con Gunfinder
Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online.
Más información
Detalles
- Idioma original
- Neerlandés
- Categoría
- Estado
- Nuevo
- Ubicación
- 🇳🇱 7665 AN Albergen, Países Bajos
- Disponibilidad
- no disponible
Actualidad
Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.
- Fuente
- Metura Schietsport
- Última actualización
- hace aproximadamente 15 horas
Descripción
Nota:
El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.
The AEA Challenger Pro 29.5’’ has no sights of its own, but it instead uses a two-part Weaver/Picatinny scope rail. That scope rail can be used to mount a rifle scope onto the air rifle that fits its accurate range. The 29.5’’ (750 mm) barrel comes equipped with a barrel shroud and uses the tensioned barrel system. This means the barrel has an exceptional stiffness, which results in less vibrations during a shot and greatly increases accuracy. The barrel shroud is kept in place with an end cap that’s screwed onto the M14 thread at the end of the barrel. You could still choose to mount a moderator onto the barrel by using a thread adapter.
This AEA Challenger Pro 29.5’’ uses a regulated system, which ensures consistent shot power for as long as the cylinder pressure is sufficient. The PCP cylinder has a capacity of 350 cc and a maximum fill pressure of 250 bar/3600 PSI. It’s mounted right below the barrel shroud and it has two pressure gauges. One of those is used for checking the remaining fill pressure in the PCP cylinder and the other is used for gauging the regulator pressure. The PCP rifle is available in several calibres and they each have their own magazine capacity. You’ll find a brief overview below:
• 5.5 mm / .22 – capacity of 12
• 6.35 mm / .25 – capacity of 10
• 7.62 mm / .30 – capacity of 9
• 9 mm / .35 – capacity of 8
The stock can be folded, so you can transport and store the slightly easier. It features an elevation adjustable cheek rest, so you can line your eyes up perfectly with a rifle scope. Additionally, the butt stock comes equipped with an extendable monopod. There’s a short Weaver/Picatinny accessory rail on the bottom of the AEA Challenger Pro 29.5’’ rifle’s fore-end, which can be used to mount it onto a shooting stick or to mount a bipod onto it. Using a bipod and the monopod at the same time will allow you to create a rather stable set-up for the air rifle, which will definitely have a positive impact on its accuracy.
Specificaties
Merk
AEA Airguns
Kaliber
5.5 mm / .22, 6.35 mm / .25, 7.62 mm / .30, 9 mm / .35
Krachtbron
Perslucht
Vuldruk (bar / psi)
250 / 3626
Gereguleerd
Ja
Spansysteem
Zijhevel
Magazijncapaciteit
8, 9, 10, 12
Looplengte (mm)
750
Totale lengte (mm)
980
Vizier
Geen vizierlijn
Inclusief richtkijker
Nee
Montagerail type
Dovetail (11 mm)
Kolf
Universeel
Kolf materiaal
Aluminium / Synthetisch
Extra's
2 magazijnen, Vulnippel
