JP ENTERPRISES JP-5™ Lock Piece 60°

189,90 €

De libre adquisición (a partir de 18 años)

8700 Leoben, Austria

ID: 10095665

Compra seguro con Gunfinder

Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online. Más información

Sobre el vendedor

Earms

Vendedor

3.748 anuncios

Detalles

Idioma original

Alemán

Categoría

Estado

Nuevo

Ubicación

🇦🇹 8700 Leoben, Austria

Disponibilidad

plazo de entrega desconocido

Actualidad

Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.

Fuente: Earms
Última actualización: hace aproximadamente 8 horas

Descripción

Nota: El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.

JP-5™ Lock Piece 60° What an adjustable gas block is to an AR, the lock piece is to the roller-delayed JP-5™ platform. This easily interchangeable component allows you to tune the recoil impulse of your rifle to suit whatever ammo or configuration you want to run. Like every part we make, our JP-5™ Lock Pieces are a premium component manufactured from a proprietary steel and finished with a highly lubricious nitride coating for low wear and low friction. Selecting a Lock Piece For Your JP-5™ Lock pieces for the JP-5™/MP5 pattern operating system are distinguished by the angle of the roller bearing surfaces. Most JP-5™ models will ship with the 80° lock piece. This angle determines how much force is required to open the action. The larger the angle, the easier it is for the action to open. So, systems with higher pressure will take a lower angle of lock piece and vice versa. If you increase the pressure in your system—e.g., changing to a longer barrel, adding a suppressor, switching to higher pressure ammo—a lower-angled lock piece will function better. If you are decreasing the pressure, a higher-angle lock piece might function better. In general, if your JP-5™ cycles weakly and unreliably, a higher angle of lock piece is recommended. If the bolt is cycling violently with the SCS bottoming out noticeably in the buffer tube, a lower angle of lock piece will help. Be aware that under-delaying the JP-5™ combined with high-pressure ammo can damage the gun. In our standard 14.5" barrels, we have found the 80° piece to be the best all-around angle to reliably run low-pressure ammo such as Steel Challenge hand loads or the 130 Federal Syntech while also reducing recoil for high-pressure loads. Competitive shooters looking to optimize for recoil reduction will opt to move down to a lower angle, typically the 70°. The 70° piece will run any standard pressure loads but will be closer to the edge of the operational window with low pressure loads like the 130 or 150 Federal Syntech or similar low-pressure hand loads. When running the 70° lock piece with such loads, we recommend more regular cleanings of your JP-5™. Several of our top shooters are running this lock piece successfully. Compatibility JP-5™ lock pieces are compatible with the H&K MP5 platform but not all MP5 clones. Any non-H&K MP5 clone that takes H&K lock pieces will be compatible with JP-5™ lock pieces. Because of the precise geometry of the locking surfaces, switching to a new lock piece may alter the bolt gap of a given rifle. Because of this, we recommend validating bolt gap of any rifle after changing out the lock piece. MADE IN THE USA

Imprimir

JP ENTERPRISES JP-5™ Lock Piece 60°

Earms

Detalles

Actualidad

Descripción

Esto también podría interesarte

Servicio de compra

Mejores subastas

Vender gratis en Gunfinder

Ofertas patrocinadas