DAA PDR PRO-II HOLSTER SIG P320/P320RX/P320X5 RH NEGRO
79,50 €
De libre adquisición (a partir de 18 años)
4240 Freistadt, Austria
0
ID: 10089882
Compra seguro con Gunfinder
Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online.
Más información
Detalles
- Idioma original
- Alemán
- Categoría
- Estado
- Nuevo
- Ubicación
- 🇦🇹 4240 Freistadt, Austria
- Disponibilidad
- disponibilidad limitada
Actualidad
Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.
- Fuente
- Shootingstore
- Última actualización
- hace aproximadamente 4 horas
Descripción
Nota:
El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
