LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 1 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 2 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 3 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 4 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 5 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC, imagen 6 de 8

LANCER SYSTEMS AR-15/M4 LAM Adaptive Magwell MIL-SPEC

189,90 €

De libre adquisición (a partir de 18 años)

8700 Leoben, Austria

ID: 10088980

Esta oferta no está disponible actualmente.

Compra seguro con Gunfinder

Nuestra verificación de identidad impulsada por IA hace que Gunfinder sea el marketplace más seguro online. Más información

Sobre el vendedor

Earms

Vendedor

3.748 anuncios

Detalles

Idioma original

Alemán

Categoría

Estado

Nuevo

Ubicación

🇦🇹 8700 Leoben, Austria

Disponibilidad

no disponible

Actualidad

Esta oferta se basa en una sincronización de datos, mediante la cual la información de la oferta se ha transferido a nuestra plataforma desde una tienda, distribuidor o marketplace externo. Ten en cuenta que pueden producirse diferencias de precio temporales debido a posibles retrasos en la transferencia de datos.

Fuente: Earms
Última actualización: hace aproximadamente 22 horas

Descripción

Nota: El artículo se encuentra en el extranjero. Ten en cuenta que las condiciones de entrega, los plazos de envío y/o el proceso de compra pueden variar.

The Lancer Adaptive Magwell (LAM™) is a bolt-on upgrade for all milspec AR-15’s which increases the effective diameter of the magazine well, decreasing reload time and improving reliability under stressful or adverse conditions. LANCER LAM™ Magwell Features: One-piece aluminium construction Designed for milspec AR-15/M4/M16 rifles with standard forged lower receivers with removable trigger guards Compatibility: Works only with AR-15/M4/M16 Forged Lower Receiver manufactured according to Mil-Spec diameter with removable trigger guards Works with most standard AR-15/M4/M16 USGI pattern magazines NOT compatibel with Billet Lower Receiver NOT compatibel with S&W Lower Receiver Specs: Forged Magazine Well Extension, precision machined from 6061-T6 aluminum Finish: Mil-Spec Type III black Includes: Rubber gaskets for a snug rattle-free fit Informations: Compatible Lower Receiver see under this article, accessories INSTALLATION INSTRUCTIONS 1. Remove spring pin (or roll pin) from the front of the trigger guard where it connects the existing magwell. 2. Swing the trigger guard down so that you have approximately 1/2″ of clearance below the magwell. 3. Slide the Lancer Adaptive Magwell (LAM) over the lower lip of the receiver until it stops, making sure that the rubber gasket is properly seated down in the front pocket of the LAM. (NOTE: The one-piece LAM comes with two styles of rubber gasket. You may want to test fit the magwell with both to determine which gasket style will work best for your particular receiver.) 4. Using a small screwdriver or the tip of a dummy round, depress the spring-loaded pin on the LAM and slide it the rest of the way onto the receiver until the spring-pin pops into place in the trigger guard pin hole. 5. Re-install the front of the trigger guard into the mounting location on the LAM. 6. Check to make sure the LAM is secure and perform a basic function test on the rifle prior to live-fire use. MADE IN THE USA

Imprimir