Achtung: Din browser er forældet. Bemærk, at dele af Gunfinder derfor ikke vil fungere. Du bør opdatere din browser så snart som muligt. Læs mere her!

MDT – .308/6.5 Creedmoor MDT metal-AICS-magasin

≈ 666 kr
Pris hos forhandleren: 89,11 €. Omregnet efter ECB-kursen fra 20. november 2026.
Våbentilladelse påkrævet
25710 Vreta, Finland
0
ID: 11470338
Køb fra et land uden for EU: Våbnet går gennem en importør i dit land, og forhandleren sørger for eksporten. Sådan foregår køb fra Europa
Køb sikkert med Gunfinder
Vores AI-baserede identitetskontrol af sælgerne gør Gunfinder til den sikreste markedsplads på nettet. Læs mere
Om sælgeren
MILDOT Finland
Forhandler

Detaljer

Originalsprog
Engelsk
Kategori
Stand
Ny
Placering
🇫🇮 25710 Vreta, Finland
Tilgængelighed
kan leveres

Aktualitet

Dette tilbud er en kopi, hvor tilbudsdata er blevet overført til os fra en webshop, forhandler eller ekstern markedsplads. Bemærk, at eventuelle forsinkelser i dataoverførslen kan medføre midlertidige prisforskelle.
Kilde
MILDOT Finland
Sidst tjekket hos forhandleren
for cirka 7 timer siden

Beskrivelse

Bemærk: Varen befinder sig i udlandet. Bemærk, at leveringsbetingelser, leveringstider og/eller købsproceduren derfor kan være anderledes.
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.

SPECIFICATIONS

3.055” Outside Length

with binder plate 2.870” max cartridge overall length (COAL)

 without binder plate 2.960” max cartridge overall length (COAL) OBSERVE, this version only on special order. (see limitations below) 

4.61” Rear Height

COMPATIBILITY

These magazines will need to be slightly modified to function with Howa 1500 SA rifles.

308WIN

6mm Creedmoor

243WIN

260 Rem

6.5 Creedmoor

7mm-08 Win

308/7.62×51 NATO

22 – 250 Rem (will work at a reduced capacity)

The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.

The magazines without front binder plates (Observe, special order item) allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp.

Lignende tilbud