DAA Click-regulowany pokrętło do proszku

The DAA Click-Adjustable Powder Knob makes setting and adjusting your powder
charge much easier and more precise. And it looks so cool too!

The large 30mm round, aluminum machined and laser engraved knob is knurled
around the outer edge making it easy and convenient to rotate the bolt and adjust
the charge. The two piece system includes a spring and steel ball which clicks over
serrations in the back of the knob, creating loud audible clicks which allow you
accurately rotate the dial in steps of 20deg, 18 clicks per rotation. These adjustments
are easily minute enough for any practical adjustment of the measured powder charge.

The laser engraved dial indicates direction for increasing or decreasing the
charge, and the numbers allow you keep track of what the correct position should
be for one load or another.

The DAA Click-Adjustable Powder Knob assembled in minutes on your existing
Dillon powder dispenser adjustment bolt.

Watch the video for assembly instructions.

Please note:

Our assembly is “drop-on” ready to use on Dillon’s small/standard
Powder Bar (as used for all pistol and most rifle loads). However, for the larger
Magnum Rifle Powder Bar, you will need to drill a 4.5-6mm hole for the spring and
ball in the powder bar itself, using half the length of the spring provided. See
attached picture.