Lee Hulslengtemeter en Hulshouder Kal. .308 Winchester

The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

Technical Information

Material: Hardened Steel

Features: Caliber specific Shellholder and length gage

Notes: Cutter and Lock Stud (476-992) Sold Separately

Special Note: The Large Cutter and Lock Stud (153-052) is required for .475 and larger calibers (Sold Separately)