Atlas BT69 Gen. 2 CAL Bipod: Hoog met 2-Schroef Picatinny Klem

BT69 Gen. 2 CAL Atlas Bipod: Tall with 2-Screw Clamp. The BT69 is the taller version of the Atlas BT65. The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT69 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below. Height Range: 15,5 - 31,24cm (20cm at 90°) (6.1 - 12.3”, 8.2” at 90°) Preloaded Cant: 45 degrees Position Button 1,27cm (0.5") diameter 5 leg positions: 0, 45, 90, 135 & 180° Non-Rotating Legs: outer leg does not rotate around inner leg Larger, stronger inner legs Weight: 411 grams (14.5 ounces) Footprint: 23,5 - 41,9cm (9.25-16.5”) Using the KMW "Pod-Loc™" With the CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the Pod-Loc™ lever. Turn clockwise to lock and counter clockwise to un-lock. The Pod-Loc™ lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved. More Information & Accessories Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions. Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions 1,9cm (¾”) apart Optional 7,62cm (3”) Leg Extensions to increase height Standard soft, durable Rubber feet that are suitable for many surfaces Optional interchangeable Ski, Spike, Cleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip Optional mounting systems available for Accuracy International and Sako rifles