Achtung: Je browser is verouderd. Daardoor werkt Gunfinder mogelijk niet overal goed. Update je browser zo snel mogelijk. Lees hier meer!
Gunfinder is ook beschikbaar voor Nederland.

RADIAN WEAPONS GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 COMPRESSOR™ Quick-Tune Guide Rod Kit

135,90 €
Vrij verkrijgbaar vanaf 18 jaar
8700 Leoben, Oostenrijk
15
ID: 10094086
Dit aanbod is momenteel niet leverbaar.
Aankoop van buiten de EU: Het wapen gaat via een importeur in jouw land; de dealer zorgt voor de uitvoer. Zo verloopt de aankoop uit Europa
Veilig kopen met Gunfinder
Onze AI-gestuurde identiteitsverificatie van verkopers maakt Gunfinder tot de veiligste marktplaats online. Meer weten
Over de verkoper
Earms
Dealer

Details

Originele taal
Duits
Merk
Glock
Product
Glock 19
Categorie
Staat
Nieuw
Locatie
🇦🇹 8700 Leoben, Oostenrijk
Beschikbaarheid
niet leverbaar

Actualiteit

Dit aanbod is gebaseerd op een aanbiedingssynchronisatie, waarbij de aanbiedingsgegevens vanuit een shop, handelaar of extern platform naar ons zijn overgedragen. Houd er rekening mee dat door mogelijke vertragingen bij de gegevensoverdracht tijdelijke prijsafwijkingen kunnen optreden.
Bron
Earms
Laatst bijgewerkt
ongeveer 5 uur geleden

Beschrijving

Opmerking: Het artikel bevindt zich in het buitenland. Houd er rekening mee dat hierdoor de leveringsvoorwaarden, verzendtijden en/of het aankoopproces kunnen verschillen.
Most adjustable guide rods on the market use a cap screw to retain the spring. The problem? Loose screws are too common and thread locker forces you to commit to one spring weight.Enter the screwless design of the COMPRESSOR Quick-Tune Guide Rod. The dovetail interface is captured by the spring, creating a simple and secure lock-up. Flutes along the guide rod allow the spring to move with less friction for smoother cycling. The heat treated guide rod has a slick, durable, and corrosion-resistant Nitride finish. Included: 1 - Hardened 17-4 SS Guide Rod 3 - Flat wire Springs in 13lb, 15lb, and 18 lb weights 1 - SS Washer for Gen3 1 – SS Captive bushing for Gen4 & Gen5 compatibility Specs: Compatible with GLOCK® 19 / 19X / 45 / 47 / 49 GEN1-5 models NOT compatible with other models INSTALLATION INSTRUCTIONS STEP 1 | Compress installed spring and insert tool* into the cross hole to hold the spring down. STEP 2 | Remove the dovetailed end cap. Then remove the tool from the cross hole, allowing the spring to be removed. STEP 3 | Install a different spring weight, compress new spring, and insert the tool back into the cross hole again. STEP 4 | Align dovetail to install cap, remove the tool, and allow spring to capture around the dovetail interface. While a tool is not necessary for the Radian guide rod, it can assist in holding the spring down when removing and installing the cap. MADE IN THE USA

Vergelijkbare aanbiedingen