Magazine extension for H&K MR308 – 10-round .308 magazine

This specially designed magazine extension gives a compatible 10-round magazine the external appearance of a longer 20-round magazine without changing the magazine capacity.When installed, the lower part of the original 10-round magazine is enclosed by the extension. When the magazine is in the firearm, essentially only the extension is visible from the outside, creating a continuously longer magazine look.The extension is solid inside and does not create additional space for cartridges. The original capacity of the magazine remains completely unchanged.Features:Designed for compatible 10-round magazinesAppearance of a longer 20-round magazineNo increase in magazine capacitySolid internal constructionPrecise fit for the original magazineDetachable designAssembly & Disassembly:First, the original base plate of the magazine is removed for assembly.Then the supplied disassembly pin is inserted into the designated slot inside the extension. The pin remains in the extension during use.Afterwards, the 10-round magazine is fully pushed into the extension until it locks securely.To disassemble, the integrated pin is pushed in from the bottom of the extension. This releases the lock and the magazine can then be pulled out of the extension.The pin is thus an integral part of the disassembly mechanism and must remain inserted in the extension during use.Scope of delivery:1× magazine extension1× disassembly pinThe magazine shown in the product images is not included and is for illustration purposes only.Important note:This product is exclusively an external extension for an existing 10-round magazine. The extension does not increase magazine capacity and is not designed to hold additional cartridges. The product is sold by Masoumi Customs.