Accu-Tac WB-04 bipod with original packaging

Purchased 2024 Sale due to giving up the hobbyCondition is good / The bipod was used very little and is almost like new / see photos Version with Quick Detach for Picatinny rail.The design of the bipod Accu-Tac WB-4 consists of a lightweight yet highly durable aluminum alloy 6061-T6 with black anodizing and is reinforced with metal parts at heavily stressed points. The legs can be locked in four positions – 0°, 45°, 90°, and 135°. The leg length can be adjusted in 5 steps using a detent adjustment, with an additional zero position available. In case of wear, the rubber foot cap can be unscrewed and replaced. The head with quick-release mount weaver/picatinny is connected to the legs via a clamping screw with lever. By loosening this screw, the head can be tilted to the right or left, allowing the firearm to be held level regardless of the surface of the support.Height and width can be adjusted in numerous variations. The height can be changed from 114.3 mm to 190 mm and the width from 254 mm to 355.6 mm, depending on the chosen leg angle. Technical data according to the manufacturer:Min. height (legs at 45°): 4.5" / 114.3 mmMin. height (legs at 90°): 6.0" / 152.4 mmMax. height (legs at 90°): 7.5” / 190.5 mmMin. stance (legs at 45°): 10.0” / 254 mmMax. stance (legs at 90°): 14.0" / 355.6 mmWidth in closed position: 5.0" / 127 mmLength in closed position: 7.5” / 190 mm As always:Cash on pickup in Bergheim-Niederaußem or prepayment and shipping (only within Germany) possible with buyer covering costs; private sale without warranty or guarantee / no returns!