#11 percussion caps for making your own percussion revolver with cap former

#11 primers, #11 caps 4.2mm made yourself with primer former for percussion revolvers. With the primer former, you punch out finished primer bodies from aluminum cans of drinks, which you cut into strips and position in the slot of the former, then a quick hit on the punch and the finished primer falls out of the hole at the top. After that, you fill these yourself with primer powder that you take from children's toys. I will upload a few examples.. From paper rolls, you take the primer discs by placing a paper strip in water and after a few moments, peeling off the thin paper top layer and then scraping off between 3 and 5 primer discs, which are then placed as a moist mass in the finished primer at the bottom and set out to dry in the sun. Optionally seal with hairspray, or place a paper star on top.. also working is simply punching out the caps from the roll with a paper punch with a circle diameter of 4mm or with a star punch.. only the primer former is sold.. the rest in the pictures is for better illustration. The star punch can be bought on eBay.. the former is also available in size #10 (4mm). The primer former body is made of blued C45 steel and the blade is made of stainless steel. No cheap cast junk..