Original AK47 (not AKM!) lower wooden handguard made of beech / Fitted for GSG Cybergun Co2 AK47 (China-Yunker)

An original lower AK47 wood handguard, meticulously fitted for installation in Cybergun / GSG Co2 AK47. Significantly larger than an AKM handguard and slightly larger than the standard lower Type-56 handguard of the Cybergun. It has been modified to also accommodate the rear steel end plate. The wood has been sanded, the surface is untreated beech.If you need a matching upper handguard or fixed stock -> Feel free to ask me specifically about it.Technically usable in real AKM, Gillmann Yunker AKM, and Yunker 2-5 (see section below).Notes Cybergun China-Yunker:Since the manufacturing quality of these rifles varies quite a bit, you may need to expect some minor fitting work for your own rifle.As the rear end cap made of steel is subject to the same manufacturing variations, this component is not included. Therefore, you should be prepared to possibly adjust the handguard to fit your own component.The AK47 handguard is designed for a milled receiver AK47 (the rectangle that is pushed into the housing is narrower than that of an AKM handguard). I would therefore recommend substituting a bit on the sides, perhaps with aluminum foil, cardboard, or packing tape, so that the handguard has no lateral play.The grip of my Cybergun was made of beech wood under the paint (see photos). If you are interested in this component in sanded condition -> I can gladly send it for 5€.Fortune favors the bold! At least that's what they say. However, one should generally use common sense before making any modifications. If you need help or have any questions in general -> Just write to me, I’m always happy to help.Notes Yunker 2-5:The handguard theoretically also fits in AKM, Saiga, Gillmann Yunker AKM, and the Izhmash Yunker. You would still need to obtain the rear reinforcement plate somewhere.For installation in the Izhmash Yunker, some substitution with packing tape, cardboard, or aluminum foil would be necessary due to the size difference of the housing insert (see last photo). Shipping:DE - Insured 6€ or uninsured 4.20€EU - Insured 14.50€ or uninsured 7€