Huben GK1 Accessories - Bodykit Barrel Jacket Picatinny Rail Picatinny Rear

I offer various accessories for the Huben GK1:1. A barrel jacket with tank clamp that replaces the original jacket and expands the GK1 with four Picatinny rails. To do this, simply remove the screw at the front of the barrel (or thread adapter for the silencer) with a 7mm Allen wrench, then the original barrel jacket can be pulled off and the new one is simply slid over it. No air needs to be released or anything else changed. The depicted Red Dot and front grip are for illustration purposes only and are not for sale.Image 1-2 Price 35€2. A barrel jacket that is simply slid over the original and then secured at the bottom with 2 screws. The barrel jacket also has a total of four Picatinny rails. The required screws and nuts are included in the purchase price.Image 3-5 Price - 25€3. An adapter to convert from the 11mm dovetail rail to three Picatinny rails, the adapter is simply screwed onto the 11mm rail from the side and holds in place through clamping.Image 6-7 Price 15€4. An adapter to get a Picatinny rear on the GK1, to attach folding stocks or adapters. For this, the two screws from the rear must be removed (caution, there is a spring underneath, so hold the rear firmly) then the adapter is placed on the rear plate and screwed back on with two longer screws (included in the delivery).Image 8 Price 8€5. A black and longer safety lever, which can also be comfortably operated with the thumb.Image 9 Price 5€7. Manometer cover made of soft TPU.Image 10 Price 5€Shipping is insured via Hermes, DHL is also possible at cost.