Snowpeak/AirmaX PP750 - Z Valve Ventil PCP Regulator for connecting compressed air bottles

PCP regulator for retrofitting for your PP750 from Snowpeak.With the Z-valve, you can connect any aluminum/carbon compressed air bottle to your PP750.More volume, conversion from pistol to rifle, and many other possibilities such as mounting a bipod on the underside. Product features:- Externally adjustable regulator- Two gauges: 1x fill pressure, 1x system pressure- 20mm rail on the underside- Thread housing side: M16x1.0- Thread bottle side: M18x1.5- Integrated filling adapter for quick coupling Installation instructions:1. Depressurize the PP750 using the pressure release screw2. Unscrew the pressure tank, unscrew the barrel.3. Screw in and align the Z-valve:Insert 1-3 thick washers for coarse adjustment.Then insert 1-2 thin washers for fine adjustment.If the system still does not hold tight, please add an additional seal at the front (see example images)4. Screw in the barrel, screw in the pressure tank5. Fill the pressure tank (cock the loading lever before filling!)6. Open/set the regulator on the front of the valve to the desired pressurePlease observe the legal regulations in your country. Product Safety Regulation (GPSR)Name: PCP TACTICAL 24Address: Rabenberger Strasse 2, 08359 BreitenbrunnURL: pcptactical24 deEmail: pcptac24(at)outlook.deImporter/EU responsible:Name: PCP TACTICAL 24Address: Rabenberger Strasse 2, 08359 BreitenbrunnEmail: pcptac24(at)outlook.de