Huben K1 Accessories

I am offering various accessories for the Huben K1:1. Picatinny rail for the barrel and air tank, this is available in different variants, the number of Picatinny rails is variable, as is the length.By default, there are 3 rails on the air tank with a length of 3.5cm, and the whole thing is secured with a screw that clamps the rail.Image 1-2 Price in the above-mentioned version - 15€2. A dummy for the power wheel, this is screwed on instead of the original power wheel and cannot be turned due to its dimensions. So if you have been to Holland, you can set the power wheel back to a maximum of 7.5J, then remove the original and screw on the dummy. This way, the K1 has the legally required maximum power and cannot be adjusted from the outside without tools. Jörg Sprave also mentioned that from his perspective, these are the legal requirements: during a check, a maximum of 7.5 Joules and not adjustable from the outside and without tools, these two points are met. This is of course not a legally binding statement, but that is how I would interpret the law. The power wheel has a slot as a guide for installation, as the wheel can only be installed in one direction, the slot must always point towards the barrel.Image 3-4 Price – 10€3. A manometer cover for the rear manometer.Images to follow Price – 5€4. A wall mount, which can be clicked in with two screws (not included, as the length is individual) to securely store the K1 standing in the cabinet. In the picture, the distance between the barrel and the wall in the installed state is 1.5cm, but this is also conditionally adjustable.Images to follow Price - 8€