AK (Galil RK62 Vektor R4 R5 and clones) Combo gas block / sight carrier -> Perfect for Zastava Iraqi Tabuk build

Price would be negotiable.Unbored original parts in top condition for the Galil and clones. Ideally suited for a 7.62 carbine conversion based on the Tabuk model.Features/Technical:Inner diameter for barrel ~16mm instead of the common ~15mm for AKM gas blocks. Possibly, the BM would need to add a spacer.The approach for drilling the angled gas channel is pre-fabricated, final drilling must still be done by yourself.Front sight protection is driven in laterally in a dove-tail guide and fixed/aligned with screws. Unfortunately, the screws are missing, but that shouldn't be a problem, as no rare special screws are needed for this.The front sight is unfortunately missing - but you can easily make one yourself (I can provide the exact measurements if needed). For a Tabuk build, this step would be essential anyway.Since the Tabuk carbine uses the rear sight of an AK, which is significantly lower than the sight line of the Galil, you would need to lower/shorten the front sight protection by about ~1cm (I can find out the exact measurement for you, or you can determine it yourself).The front flip-up night sight is also missing - but this would have to be addressed due to the aforementioned shortening anyway.Notes:If you have any questions, please do not hesitate to contact me!Shipping within the EU is possible, unless the possession of this component is not allowed or heavily regulated in your country (e.g., in Romania or Belgium)The component is stored with silicone oil for protection.JMacCustoms recently released a new series of "Classic AK Muzzle Devices," including a Tabuk flash hider. Who knows, maybe a few copies will make it to the EU:https://www.jmac-customs.com/TCMD?hcUrl=%2Fen-US