Tikka T3/T3x chamber grip - Helix Sphere - Made in Germany

Tikka T3/T3x Chamber Grip - BallEnhance your Tikka T3/T3x rifle with this chamber grip that extends the factory chamber handle. The shape is a smooth ball with a slightly rough surface texture, very similar to the shape of the factory oversized chamber grip.You can install the chamber grip in just a few minutes. Simply insert the pin end into the hole of the chamber handle and secure it with the stainless steel set screw. As you tighten the screw, the pin expands and locks in place. Additionally, the grooves around the pin grip the inner surface, ensuring a secure fit.We manufacture these chamber grips using selective laser sintering (SLS), a high-quality 3D printing process. Thanks to SLS, the material fuses homogeneously, allowing the part to achieve mechanical properties comparable to those of injection-molded parts. In contrast, typical desktop printed parts often fail under loads that act parallel to their layers.Technical features:The robust nylon construction (PA12) withstands heavy use.The stainless steel set screw is corrosion-resistant.Simple and cost-effective upgrade for your standard chamber grip.Made from PA12.Delivery includes:Chamber grip2.5 mm hex keyInstallation instructionsFor more information, visit our website www.insimbioutdoor.comPlease read the installation instructions carefully before installation. Factory chamber grips are often glued with JB Weld or a similar epoxy resin. Depending on the environment and use, you may also need to apply epoxy resin to prevent slipping or shifting.