Walther PDP Full Size PRO SD V2 – 5.1" with PGW compensator

Category: Handguns - Pistols Cal. 9 mmCaliber: 9mm LugerCondition: newDescription: New firearm - in stockincluding the coveted PGW Carry compensatorThe Walther PDP Full Size V2 with new optics mounting platform.The new PDP PRO SD model features all the characteristics and innovations that the firearms community loved and appreciated about the Walther PDP models from the start. In addition, they include a range of premium upgrades straight from the factory:Full-size grip and 4.5” slide5.1” barrel with muzzle thread (1/2”-28 UNEF)Dynamic Performance Trigger (22 N)Aluminum magwell18-round magazines with aluminum base pad The pistol impresses with its distinctive appearance. Deep slide serrations are found both at the front and rear of the slide. This ensures that the loading process is safe in any weather. The completely redesigned grip features a pyramid-shaped texture (Performance Duty Texture) that contributes to outstanding handling. The grip backs available in various sizes (S, M, L) are also equipped with this texture. Not too sharp to cause pain during high series or to "snag" on clothing, but aggressive enough to achieve perfect grip at all times. The contoured shape at the end of the grip provides support for the little finger and aids in intuitive pointing.All models in the PDP series have an ambidextrous slide stop lever, a reversible magazine button, and come optics ready with a milled slide top for various - optionally available - adapter plates for red dot sights from brands such as Docter, Noblex, Meopta, Trijicon, Holosun, Riton, Axion, Leupold, SIG Sauer, Vortex, or Burris Fast Fire series.The new optics mounting platform features a modified cut-out for the mounting plate. This is 2 mm longer than before, allowing for the mounting of all currently common red dot sights. Additionally, the new equipment includes recoil lugs and larger screw cutouts. This makes it possible to use the original mounting screws from the optics manufacturers for installation.For those who prefer to aim in the "classic" way using sights, this can be done with GLOCK-compatible sights. A co-witness sighting is possible. The standard sights are adjustable for height and windage right out of the box. Additional practical accessories can be attached to the Picatinny rail.The Dynamic Performance trigger breaks at the pressure point like glass with a trigger weight of 22 N. The short reset allows for consistent top performance from shot to shot. Together, these features create the conditions for controlled hits and safe trigger control in any situation and from shot to shot.The result of the perfected grip angle and the interplay of overall weight, weight distribution, and balance is excellent pointing behavior. The firearm intuitively follows the line of sight of the target eye.The stepped chamber ensures significantly better guidance and thus less fouling of the polygonal barrel.TECHNICAL DATA:Barrel length: 130 mm (5.1")Barrel: Polygonal barrelSights: adjustable for height and windage, Optic Ready, Co-WitnessMuzzle thread: 1/2”-28 UNEFTrigger: Dynamic Performance Duty TriggerTrigger weight: 22 NTrigger travel: 7 mmSafeties: Loaded chamber indicator, trigger, firing pin, disconnectSpecial features: ambidextrous slide stop lever, interchangeable magazine holder, MIL-STD-1913 accessory railMagazine capacity: 18 roundsDimensions (LxWxH): 212x34x148 mmWeight: 765 g Following the success of the PGW Glock compensator, we have now developed a compensator for the popular Walther PDP. The PGW PDP Carry Compensator provides a noticeable reduction in recoil and muzzle rise. Ideal for sporting purposes!The compensator works with all PDP models but requires a barrel with 1/2"x28 UNEF muzzle thread.With its minimal weight of only 35 grams, the PGW Carry Comp ensures 100% reliable function in your PDP with standard barrel lengths, bullet weights (95-154 grains), and loads. No additional tuning parts are required.With hand-loaded ammunition, the function with the compensator remains unaffected until the muzzle velocity falls below that of factory loads by about 15%.The Carry Compensator is secured by clamping. Many compensator mounting systems use set screws that press on the thread and can easily cause damage. With PGW's clamping mount, no damage to the thread is possible, and a secure hold is guaranteed (even without Loctite!). This also facilitates the quick disassembly of the comp. Main features of the PGW compensator:- For Walther PDP OR Pro SD Fullsize and Compact with 1/2"x28 UNEF thread- Less recoil and muzzle rise mean faster follow-up shots- Absolutely reliable function- Super lightweight 7075 aluminum construction, CNC machined- Durable hard-anodized surface- Easy mounting/dismounting