DDoptics target optics Night Falcon Gen.3 5-30x50 A4N (hunting) MRAD

Product information "DDoptics Target Optics | Night Falcon V6 5-30x50 | Gen3 | A4N (hunting) | MRAD"CT glass (Clear Transmission)Zerostop (for zero setting)Doubleturn (double scaling)Horizontal adjustment with opposing scales (Wind left - right)New Reticle 4 (A4N) with significantly finer barsvery high resolutiondiscreet, hunting design with small turretsAccessories: 1x flip caps, cleaning cloth, DDoptics chip, target sheets, target optics manual, ballistic set Which illuminated dot is installed in this riflescope?By default, a manual fiber optic illuminated dot is installed in our Night Falcon V6 5-30x50 riflescope.Hunting A4N illuminated reticleThe Night Falcon V6 5-30x50 riflescope features the successful, modern New Reticle 4.New Reticle 4 for minimal target coverageWhen looking through the new riflescope generation III, the viewer immediately recognizes the practical design:The crosshair in Reticle 4N is much finer, and the slightly thicker outer bars are only half as thick and stand significantly further apart. This is a great advantage, especially for the hunter in poor light conditions, as the target is only minimally obscured, thus allowing for a lightning-fast and secure shot to be optimally supported.The reticle is located in the ocular image plane (2nd image plane). This means it remains the same size when changing magnification. Even at 30x magnification, the crosshair only obscures the target by 3.91 mm at a shooting distance of 100 m, and the field of view at this maximum magnification is still 1.1 m at 100 m. The target optics allow for lightning-fast aiming.New featuresWhat is new in the latest generation of riflescopes?At first glance, 3 changes are immediately noticeable:1. The magnification adjustment ring has been noticeably changed and now offers more grip due to its coarser texture.2. The Reticle 4 has been made significantly finer and provides more space in the center.3. The reticle adjustment is made of metal, is clearly defined, and features Doubleturn and Zerostop.Reticle quick adjustment with ZerostopOn a double scale (Doubleturn) on the elevation adjustment turret, the number of clicks made can be read and adjusted accordingly.After zeroing, the reticle adjustment can be "zeroed." Then, the Zerostop ring is turned to the stop. Subsequently, the zero setting is countered from below using the Zerostop ring to achieve a stop at the zero position. Based on the zero position, various shooting distances can be pre-set using a marking system, assuming knowledge of the load. The windage turret is labeled with two opposing scales. From the zero setting, the reticle can be pre-set depending on wind direction and wind strength or any potential movement of the target.The parallax adjustment ensures a sharp and fatigue-free image from 25 m at all magnification settings and corrects the shooter error caused by angled viewing. Type of optics:RiflescopeDiopter adjustment:-3 to +3Weight in g:674Dawn number:15-38.7Magnification:5-30xGeneration:3Coating:HDX IIIObjective lens diameter in mm:50Exit pupil in mm:9.79-1.62Dawn number:15-38.7Field of view at 100m (in m):7.2-1.1Eye relief in mm:90.5-91.5Reticle:New Reticle 4Illuminated dot II:yesReticle image plane:2nd image planeReticle adjustment / click:0.1 MRADReticle adjustment (scaling):simpleMax. adjustment range:15 MRADParallax adjustment:20-500-infinitySurface:fine blackTube diameter in mm:30ASV Zerostop:yesObjective diameter outside in mm:58Eyepiece diameter in mm:39.5Total length in mm:345