STALON Thread Adapter M15x1 to M18x1

From STALON there are now also secure thread adapters so you can attach a suppressor with an 18x1mm connection thread to various firearms with different barrel threads. The thread adapter is made of steel and is tightened securely and stably onto the barrel with a wrench or socket wrench. Using an adapter naturally introduces more tolerances into the connection, so the adapter must always be screwed on tightly and secured with a threadlocker such as Loctite 243 according to the manufacturer's instructions to prevent the connection from loosening and going out of alignment – which can cause the projectile to touch the suppressor.

Assembly instructions: The thread adapter is mounted and secured directly on the firearm’s thread. Always check the thread on the rifle and clean it from grease and dirt before mounting the thread adapter. Also check whether the thread in the suppressor and in the thread adapter is the same. After cleaning the rifle thread, apply a threadlocker to the thread (e.g.: Loctite 243). Mount the thread adapter onto the rifle thread with threadlocker and use a 21mm box wrench, socket wrench, or similar to ensure the thread adapter is properly mounted. Wait until the threadlocker has cured before mounting the suppressor on the thread adapter. Once the threadlocker has cured, the adapter installation is complete and the rifle thread is now converted to M18x1.

STALON thread adapter M15x1 to M18x1
Product safety information: This product was made available on the marketplace before 13.12.2024. For manufacturer and safety information, please contact the offering dealer.