BGs HRBL – High Ride Belt Loop

.br-product{
font-family: Arial, Helvetica, sans-serif;
line-height:1.6;
color:#222;
}
.br-product h2{
font-size:1.2rem;
margin-top:28px;
}
.br-product ul{
padding-left:18px;
}
.br-product .info-box{
background:#ffdddd;
border-left:6px solid #c40000;
padding:12px;
margin:20px 0;
}
.br-product .tip-box{
background:#eef6ff;
border-left:6px solid #2a6fdb;
padding:12px;
margin:20px 0;
}
.br-product details{
background:#f2f2f2;
padding:10px;
margin-bottom:8px;
border-radius:4px;
}
.br-product summary{
font-weight:600;
cursor:pointer;
}


A holster can be neatly shaped and still interfere with access if the belt loop is too high, too low, or at the wrong angle. This is exactly where the BGs HRBL High Ride Belt Loop comes in: it brings the holster close to the body on the belt and allows you to adjust height and carry angle to your own build.

The slightly flexible, injection-molded construction distributes contact over a comparatively large area. This is especially relevant when a heavier pistol setup should not move unnecessarily while walking or during repeated draws.
The HRBL is not a universal problem solver for every holster. The decisive factors are the hole pattern, belt width, and desired carry position. If these three points fit, you get a flat and clearly adjustable OWB attachment.

Key Features


Adjustable carry height and tilt: You can adapt the holster’s position to your body shape, belt, and access angle.

For belts from 40 to 58 mm: Three cutouts per loop allow adjustment to different belt widths.

Wide contact area: The large surface body contact supports a stable holster position, even with heavier pistol setups.

Flat design: The holster stays closer to the body than with significantly offset mid-ride systems.

Defined hole pattern compatibility: According to the manufacturer, compatible with Blade-Tech and Safariland hole patterns as well as corresponding QD adapters.

Our Assessment
The BGs HRBL suits users who want to carry their OWB holster consciously high and close to the body. The practical difference is not visible on the table but in motion: a properly adjusted loop reduces unnecessary tilting and creates a repeatable starting point for access.
Technically, the belt loop is less complex than a complete quick-change system. This can be an advantage if you don’t need frequent platform changes and prefer a fixed, slim connection. Those who want to carry the holster significantly lower or further from the body should instead consider a mid-ride solution.
Before purchase, you should actually measure the hole pattern and belt width. Similar hole patterns may look suitable in photos, but a few millimeters of deviation are enough for a bad purchase.

Instructor Tip: Check position dry first
First mount the loop in a middle setting and check access with an empty, safely controlled setup. Then always change only one parameter at a time: first height, then angle. This way you notice which setting supports straight access instead of having to evaluate several changes at once.

Features & Construction
According to the manufacturer, the HRBL is made by injection molding and is slightly flexible. The construction has three cutout areas per loop to adjust to belts between 40 and 58 mm wide. Height and carry angle can be changed via the mounting position.
The hole pattern is, according to the manufacturer, compatible with Blade-Tech and Safariland patterns. This allows the loop to be used in combination with suitable quick-change adapters from these systems. The exact combination must still be checked before mounting.

Technical Data


Product type: high OWB belt loop for holsters; useful for a close-to-body carry position.

Belt
breite: 40 to 58 mm; suitable for sport, duty, and other belts of corresponding width.

Einstellung: Carry height and angle adjustable; allows adaptation to access and body position.

Fertigung: injection-molded, slightly flexible construction; designed for a flat connection between belt and holster.

Lochbild: according to the manufacturer compatible with Blade-Tech and Safariland; check with your existing holster before purchase.

Lieferumfang
1 × BGs HRBL High Ride Belt Loop. Other components or mounting screws are not clearly specified in the provided information.

Hinweis:
Check hole pattern, screw spacing, belt width, and desired carry height before purchase. Stated hole pattern compatibility does not replace checking the specific holster and adapter combination. Assembly and function check should always be done on a safe, unloaded setup.

FAQ

For which belt widths is the BGs HRBL suitable?
The manufacturer specifies an adjustable range of 40 to 58 mm. Measure the actual width and thickness of your belt before deciding.


Does the HRBL fit every holster?
No. According to the manufacturer, the hole pattern is compatible with Blade-Tech and Safariland. Other holsters may fit but must be checked based on hole pattern and screw spacing.


When is a high-ride loop useful?
When you want to carry the holster rather high and close to the body. For a significantly lower or more offset position, a mid-ride attachment is usually the better choice.


Can the carry angle be changed?
Yes. According to the manufacturer, the HRBL offers adjustable carry height and tilt. The optimal setting depends on the holster, belt, and your access.


Are mounting screws included?
The provided contents do not clearly specify mounting screws. Do not automatically assume existing mounting hardware compatible with the holster is included.