Area 419 MASTER Reloading Funnel Set

The Area 419 MASTER Reloading Funnel Set is a precise, modular solution for reloaders who want to handle multiple calibers and pour powder cleanly, controlled, and without constantly switching universal funnels.
The caliber-specific heads screw onto the aluminium funnel and sit on the case neck. This creates a defined guide instead of a loosely resting universal funnel. This is especially helpful for recurring loading processes and keeps funnels, heads, and the workspace organised.
Works well if …

you regularly load multiple calibers between .22 and .338;
you value a secure fit on the case neck and a well-organised loading area;
you want to use funnels and caliber heads as a permanent tool system.

Less suitable if …

you only rarely load a single caliber – then a simple funnel is usually more economical;
you use calibers outside the included head sizes without planning for the matching additional head;
you expect a set including drop tubes: drop tubes are explicitly not included.

Compatibility and variant selection
Included are six colour-coded heads for .22, 6 mm/.243, 6.5 mm/.264, 7 mm/.284, .30, and .338. The decisive factor is the matching case neck or bullet diameter; other calibers require a separately available head. Before starting a batch, clearly assign head, case, and used caliber.
Practical effect and limits
The funnel made from 6061-T6 aluminium and the suitably dimensioned heads support a consistent powder flow and reduce side spillage. However, they do not replace a powder scale or verified load data. Long stick powders can still clog or bridge; each filling must therefore be visually checked.
Black-Raptor practical interpretation: The added value lies less in speed than in a reproducible, tidy process. This makes sense for precision and long-range reloaders with multiple calibers. For occasional single batches, the comfort gain is not always worth the higher price.
Scope of delivery

1 aluminium funnel body
6 colour-coded caliber heads: .22, 6 mm/.243, 6.5 mm/.264, 7 mm/.284, .30, and .338
1 machined storage block with slots for funnel and accessories

Not included: drop tubes and additional special caliber heads.
Safe use and care

Only work with verified load data, suitable powder scale, and clearly marked components.
Before each batch, check that the correct head is firmly mounted and the case is clearly assigned.
After filling, check each case for plausible fill level and possible powder bridges.
Keep funnel and heads dry and free of powder residues; do not continue to use damaged parts.

Technical data

Manufacturer: Area 419
Manufacturer no.: 419-FN-MASTER
UPC: 853675008112
Material: 6061-T6 aluminium
System: interchangeable, screwed caliber heads

FAQ
Are drop tubes included? No. Compatible drop tubes can be added separately.
Does the set cover every caliber? No. The set includes six head sizes from .22 to .338. Different neck diameters require a matching additional head.
Does the set completely prevent powder bridges? No. Especially long powder grains can still clog. The fill level of each case must be checked.