LYMAN Brass Smith Powder Measure 7767700

Reproducible Powder Charges with Micrometer Adjustment
The LYMAN Brass Smith Powder Measure 7767700 is a volumetric measure for small pistol to large rifle cases. Its CNC-machined steel measuring cylinder is adjusted via a micrometer screw with clearly readable reference lines. This allows a proven setting to be documented and more easily found again with the same powder type.
A powder baffle in the hopper keeps the pressure on the rotor more consistent even as the fill level drops. The lever, operable from both sides, can be mounted at several angles. The standard 7/8"-14 thread allows attachment to suitable reloading presses or powder measure stands.
Compatibility and Scope of Delivery

For volumetric measuring of pistol and rifle cartridges
7/8"-14 thread for compatible presses and stands
Two outlet tubes for different case sizes
Integrated powder baffle in the hopper
Micrometer adjustment with reference scale

Not included: reloading press or powder measure stand, powder scale, powder funnel, cases, and propellant powder.
Before Purchase Note
The measure measures by volume and does not replace a powder scale. The micrometer scale is a reproducible adjustment aid but not a direct weight indication. The actual charge weight depends especially on powder type, granulation, operating rhythm, and fill level.
Every new setting and every powder change must be checked with a suitable, calibrated scale. For very coarse or hard-to-dose powders, additional dosing with a separate trickler may be useful.
Work Safely and Consistently

Mount the measure firmly and vertically; insert the appropriate outlet tube.
Only open one clearly labeled powder type at the workstation.
Perform several actuations after filling to break in.
Weigh test loads and gradually correct the setting.
Operate the lever with the same steady motion for each charge.
Regularly check charge weights during the series.

Only work with current, reliable load data. Never mix powder residues and completely remove them from the hopper after work.