Hornady G3-1500 Digital Scale 050104

Die Hornady G3-1500 is a compact digital scale for precise measurements at the reloading bench. With a capacity of up to 1,500 grains and a reading in 0.1-grain increments, it is suitable for checking powder charges as well as weighing bullets and cases.
Precise control when reloading


Measuring range up to 1,500 grains: sufficient for typical powder charges, bullets, and many cases.

0.1-grain display: fine enough for usual charge control based on reliable load data.

Continuous display up to 500 grains: makes it easier to gradually approach a powder charge with a separately available trickler.

Battery operated: flexible use on a suitable, stable work surface.

Before purchase note
The G3-1500 is a scale, not an automatic powder filler or powder trickler. The continuous display is specified up to 500 grains; the maximum weighing capacity is 1,500 grains. For reliable results, the scale must be placed on a level, vibration-free surface protected from drafts. Before each loading session, check zero point and calibration according to the instructions. If the display drifts or shows implausible values, do not continue loading but check the cause and calibration.
Usage

Place the scale on a firm, horizontal, and vibration-free surface.
Turn on, allow to stabilize, and calibrate according to the instructions.
Tare the empty weighing container and gradually add the charge.
Compare the measured value with the used load data; never exceed limits.

Scope of delivery

Hornady G3-1500 digital scale, model 050104
2 AAA batteries

Important: Powder, bullets, cases, trickler, and other shown reloading accessories are not included.