REDDING Model 15-P Competition Interior Reamer 09037

Das REDDING Model 15‑P Competition 09037 erzeugt einen gleichmäßigen 15°-Innenanschnitt am Hülsenmund. Die verstellbare Pilotstange richtet den Schneidkopf zur Innenkontur der Hülse aus und unterstützt damit einen konzentrischen Anschnitt. Gehärtete, präzisionsgeschliffene Schneiden ermöglichen saubere Schnitte ohne unnötiges Rattern.
Compatibility

For cases from caliber .22 to .45
Pilot rod adjustable for different case lengths
15° internal angle in VLD style
Manual use with the included auxiliary handle

What the tool is for
After trimming, the 15‑P removes burrs on the inside of the case mouth and creates a defined chamfer. This makes it easier to seat the bullet and reduces the risk of damaging the bullet jacket on a sharp inner edge.
Before purchase note
This tool only processes the inside of the case mouth. It does not replace an outside deburrer or case trimmer. It is not intended for calibers under .22 or over .45. The case must be empty, clean, and properly trimmed.
Application
Adjust the pilot rod to the case length, position the tool centrally, and turn with light, even pressure. Remove only as much material as needed to remove the burr and create an even chamfer. Over-chamfering weakens the case mouth and unnecessarily changes the seating surface. Clean the cutter after use of chips and store dry.
Scope of delivery

1 × REDDING Model 15‑P Competition inside chamfering tool 09037
Adjustable pilot rod with auxiliary handle