Innomount Sauer 404 saddle mount 30 mm height 17 mm

Innomount, patented locking mechanism. Innomount has developed a patented lever lock that makes accidental opening of the mount during use impossible. The locking arms with lever function are pushed into the mount in the locked state and cannot be opened by branches or other equipment. The arms are opened by pressing a button on the opposite side. Simple, secure, and ingenious. Thanks to the lever, no material is rubbed against surfaces; a clean lock occurs smoothly. Shot resistance and repeat accuracy: Innomount saddle mounts are completely shot-resistant, regardless of caliber or weight of the scope, and repeat accurate without re-zeroing when removing and reattaching. A reliable mount that withstands frequent changes!

Features of the Innomount saddle mount:

Low weight, 110–160 grams depending on model and ring size
Developed and manufactured in Germany
Repeat accurate without point of impact change
Robust construction
Quick change between mounts
Rotatable by 180°

Innomount saddle mount for Sauer 404 is available in the following heights:

14 mm * (for objective diameter up to max. 50 mm)
17 mm *
20 mm *

* The height is measured from the bottom of the inside of the ring to the top of the housing. The saddle mount for Sauer 404 has a straight upper profile. At the lowest height (14 mm), the distance between the bottom edge of the scope and the mount is therefore only 1–2 mm. It is therefore important that the scope does not protrude beyond the adjustment wheels for elevation and windage.