RCBS Case Lube Pad Case Lube #9307

Simple use for smooth caliber processes Robust construction, even distribution, and durable use The RCBS Case Lube Pad is a proven accessory for reloaders who want to evenly and controllably apply suitable case lubricant to cases before sizing. Especially when full-length resizing bottleneck cases, sufficient lubrication is crucial to reduce friction between the case and the sizing die and to prevent the case from sticking in the die. For use, a small amount of suitable case lube is spread on the surface of the pad. Then the cases are rolled over the pad with light pressure, distributing a thin film of lubricant on the case surface. This method allows simultaneous preparation of multiple cases, supporting a structured workflow for larger batch sizes. Only as much lubricant as needed for the respective sizing process should be used, as excessive lubrication can cause unwanted effects. The robust and reusable design of the RCBS Case Lube Pad is made for regular use at the reloading bench. If it gets dirty, the pad can be cleaned and then reused. Combined with a suitable RCBS case lubricant, this creates a simple, controllable system for preparing cartridge cases. The Case Lube Pad is suitable for both experienced reloaders and beginners who want to establish a reproducible and clear step in the sizing process. Product details: Manufacturer: RCBS Product type: Case Lube Pad / case lubricant pad Application area: case preparation for reloading Function: even application of case lubricant Use: roll cases over the prepared surface Design: reusable Care: cleanable if needed Suitable for: various metallic cartridge cases Recommendation: use with suitable case lubricant