Real Avid Fore-end Adjuster Pro

REAL AVID · SIGHT TOOL
Front Sight Adjuster Pro for compatible A1-/A2-front sights
Longer, double-sided 5-pin/4-pin adjuster with T-handle for lower or protected front sights. The purchase decision depends on the number of pins, front sight contour, and axial access – not just the term “AR-15.”
A1 5-Pin · A2 4-Pin

Purchase check: does the tool fit?

Fits well
A confirmed A1 or A2 front sight post sits lower or between protective flanks.
You want a longer shaft with a controllable T-handle.
Number of pins and outer contour of the specific sight have been checked in advance.

Rather doesn’t fit
Your sight uses a proprietary front sight geometry.
You want to adjust rear sight windage or a dovetail sight.
Only individual pins would engage the front sight.

Features with practical effect

A1 side · 5 Pin
For compatible A1 locking geometries. Before turning, all pins must engage evenly.

A2 side · 4 Pin
For matching A2 front sight posts; partial contact is a clear stop signal.

T-handle
Helps guide pressure and rotation axially instead of levering sideways on the front sight or protective flanks.

Extended shaft
The practical advantage of the Pro version for deeply protected front sights.

Limits, disadvantages, and avoiding bad purchases

Manufacturer-listed platform examples are not blanket model approvals.
Number of pins, front sight contour, and axial clearance must match the specific sight.
Do not use an additional lever or pliers on the T-handle.
Stop at high resistance and check fit, dirt, corrosion, and sight instructions.

Techn
Technical Data – with Practical Interpretation


Model Front Sight Adjuster Pro · AVARFSAPRO.

A1 side 5 Pin – only for matching A1 geometry.

A2 side 4 Pin – only for matching A2 geometry.

Material Tool steel with black oxide coating.

Operation Extended double-sided insert with T-handle/protective housing.

Practical rule Place tool dry; all pins must bear evenly.

Scope of delivery


1 × double-sided A1/A2 adjustment insert
1 × T-handle/protective housing with lanyard option

Sight, replacement front sight, rear-sight tool and safety glasses are not included.

Safe use
Only work on unloaded, secured firearms. Document starting position and direction of rotation, choose small traceable steps and then check point of impact under safe conditions. Do not turn further if contact is incomplete.
FAQ
Which side is for A1 and which for A2? 5 Pin is intended for compatible A1, 4 Pin for compatible A2 front sight posts. Does the tool fit every AR front sight? No. Locking geometry, contour and axial clearance must fit. Does it adjust windage? No. It serves to rotate a compatible front sight post and thus adjust elevation. What to do if there is high resistance? Do not lever further; check fit and condition first.

Black-Raptor classification The Pro version is especially useful when a confirmed A1/A2 front sight post is deep or protected. For freely accessible standard front sights, a more compact adjuster may suffice.