Vortex Razor HD Gen II-E 1-6x24 VMR-2 MRAD

.br-product{
font-family: Arial, Helvetica, sans-serif;
line-height:1.6;
color:#222;
}
.br-product h2{
font-size:1.2rem;
margin-top:28px;
}
.br-product h3{
font-size:1rem;
margin:0 0 8px;
}
.br-product ul{
padding-left:18px;
}
.br-product .info-box{
background:#ffdddd;
border-left:6px solid #c40000;
padding:12px;
margin:20px 0;
}
.br-product .tip-box{
background:#eef6ff;
border-left:6px solid #2a6fdb;
padding:12px;
margin:20px 0;
}
.br-product .trust-box{
background:#eef7ee;
border-left:6px solid #3f8f3f;
padding:12px;
margin:20px 0;
}
.br-product details{
background:#f2f2f2;
padding:10px;
margin-bottom:8px;
border-radius:4px;
}
.br-product summary{
font-weight:600;
cursor:pointer;
}

A 1-6x LPVO doesn’t have to do everything. It just has to do the crucial things really well: get on target quickly at 1x, provide enough image and reticle structure at 6x for medium distances, and stay robust enough so it doesn’t become a fragile showpiece on driven hunts, AR platforms, or dynamic ranges. That’s exactly where the Vortex Razor HD Gen II-E 1-6x24 VMR-2 MRAD sits.

This optic is the classic Razor solution for shooters looking for a fast, high-quality LPVO and who deliberately want to work with a SFP reticle. At 1x, the reticle stays slim and doesn’t unnecessarily clutter the sight picture. At 6x, you can use the VMR-2 MRAD cleanly to set holdover points and wind corrections with clear MRAD references.

The most important point before buying: The VMR-2 MRAD is in the second focal plane. This is not a disadvantage but a conscious decision. The reticle always stays the same size and is easy to see. However, the MRAD hold values are only correct at maximum magnification, i.e., at 6x. Those who understand this get a very fast and clean LPVO. Those expecting FFP logic at every magnification should rather go for the Razor Gen III.

Key Features


1-6x magnification: 1x for quick target acquisition, 6x for controlled shots at medium distances.

VMR-2 MRAD reticle: MRAD-based references for holdover and wind corrections.

SFP design: reticle stays the same size at every magnification; MRAD values are correct at 6x.

30 mm tube: proven mounting base with a wide selection of compatible mounts and rings.

0.2 MRAD click value: corresponds to 2 cm at 100 m and 10 cm at 500 m per click.

Wide field of view: approx. 38.3 m at 100 m at 1x – important for quick target acquisition and situational awareness.

Large eye relief: approx. 101.6 mm – comfortable for quick holds and dynamic use.

Illuminated reticle: 11 brightness levels according to specs for different lighting conditions.

Compact design: approx. 256.5 mm length at approx. 610 g weight.

Robust Razor Gen II-E construction: one-piece aluminum housing, ArmorTek®, and waterproof design according to manufacturer/dealer info.

Our Assessment
The Vortex Razor HD Gen II-E 1-6x24 VMR-2 MRAD is not a new trend optic but a very strong workhorse among high-end LPVOs. It suits users who don’t need an overcomplicated 1-10x system but want a fast 1-6x optic with very good optics, a clean reticle, and robust mechanics.

For driven hunts, the optic is interesting because 1x and a wide field of view offer real advantages. You can keep both eyes open, better perceive the surroundings, and still zoom up to 4x to 6x when needed. For AR-15, carbine, 3-gun, and dynamic range use, the advantage is similar: fast at the bottom, controlled at the top, without making the setup unnecessarily front-heavy.

The VMR-2 MRAD is the version for shooters who want more than a pure BDC reticle. You get clear MRAD markings but must observe the SFP rule: the values are correct at 6x. For a 1-6x LPVO, this is manageable in practice because 6x is the magnification where you consciously use holdover and wind corrections anyway.

Black-Raptor short summary
Buy if: You want a high-quality, sch
nelles 1-6x-LPVO for driven hunt, AR platform, carbine or dynamic rifle and you want to consciously use MRAD holdover values at 6x.
Do not buy if: You are looking for an FFP reticle with correct holdover values at every magnification, 10x reserve, or a pure long-range scope.

Important classification before purchase
The Razor HD Gen II-E 1-6x24 VMR-2 MRAD is an SFP-LPVO. That means: The reticle stays optically the same size, whether you are at 1x, 3x or 6x. This is especially pleasant at 1x because the reticle does not appear too large and restless. The price for this is that the MRAD subtensions are only correct at 6x.

In practice, this is less problematic than it sounds. At 1x you don’t work with precise MRAD holdover values anyway, but with quick target acquisition. At 6x you then have the correct hold points for deliberate holding, wind corrections and medium distances. The only important thing is that you train this logic and don’t try to use the MRAD scale like at 6x on 3x.

Compared to the Razor Gen III 1-10x series, the Gen II-E 1-6x is simpler, more classic and more direct for many applications. Less maximum magnification, but proven 1-6x logic, constant reticle, 30 mm tube and a very fast working range. Those who want more ballistic depth and FFP system logic go for the Gen III. Those looking for a fast, strong LPVO with MRAD references are very well served here.

MRAD in practice – using SFP correctly
MRAD here is not a complicated calculation kit, but a clear working language. However, an important rule applies to this optic: MRAD holdover values in the VMR-2 are correct at 6x. That’s exactly why you should assign clear roles for use: 1x for speed, 2x to 4x for controlled target acquisition, 6x for MRAD work.

The click value of 0.2 MRAD means: One click shifts the point of impact by 2 cm at 100 m, 6 cm at 300 m and 10 cm at 500 m. This is coarser than 0.1 MRAD, but absolutely practical for a 1-6x LPVO. This optic is not built to chase finest click corrections at 900 m. It is built to work quickly and robustly from close to medium distance cleanly.

0.2 MRAD per click: 2 cm at 100 m, 6 cm at 300 m, 10 cm at 500 m.

1 MRAD: 10 cm at 100 m, 30 cm at 300 m, 50 cm at 500 m.

SFP rule: Use MRAD holdover values in the VMR-2 correctly at 6x.

1x logic: Reticle center and illumination for speed, no fine holdover work.

6x logic: MRAD markings for holdover, wind and controlled medium distances.

Data card: For this optic, a few core values are often enough: 100 m, 200 m, 300 m and depending on setup other relevant distances.

Instructor principle: Each magnification gets a task with SFP-LPVO
Don’t train the Razor as if every magnification is the same. 1x is your speed mode. 3x to 4x is control with more target image. 6x is your MRAD work. If you want to read holdover, wind or point of impact in the VMR-2, consciously go to 6x. Then reticle, turret and data card speak the same language.

Practical tip: Build data card for 6x
Don’t write your holdover values generally for “the optic”, but clearly for 6x. Example: 200 m – 0.4 MRAD, 300 m – 1.1 MRAD, 400 m – 2.0 MRAD. The concrete values depend on weapon and ammunition. The decisive factor is the procedure: go to 6x, hold value in reticle, take shot cleanly.

Application scenarios


Driven hunt: 1x, wide field of view and illuminated center support quick target acquisition with suitable hunting setups.

Stalking and territory: 6x offers reserve when a target is further away and must be held more precisely.

AR-15 and carbine: strong when a setup should stay fast but can do more than a pure red dot.

3-Gun / Dynamic Rifle: useful for switching between close range, medium targets and more controlled shots.

Range training: VMR-2 MRAD allows clean hold points if the 6x SFP rule is observed.

Features
& Construction
The Razor HD Gen II-E is designed as a fast, robust LPVO. The 30 mm tube keeps the mounting options broad and makes the optic easier to integrate into many existing setups than 34 mm systems. At about 256.5 mm length, it remains compact enough for short ARs, carbine setups, and versatile hunting rifles.

The XR™ Plus coating, Plasma-Tech finish, and HD optical system are designed for a clear image across the entire 1-6x range. This is crucial for an LPVO: at 1x, edge distortion and an unstable view are immediately distracting, while at 6x you need enough resolution to cleanly align the target and hold points.

The covered turrets fit the intended use well. This optic is not an open long-range turret scope but a fast LPVO. In practice, you will solve many corrections via hold points in the reticle, especially when working at 6x. The VMR-2 MRAD is exactly designed for this.

Technical Data

Product type: LPVO / SFP scope – for hunting, range, AR platforms, and dynamic rifle use.

Magnification: 1-6x – 1x for speed, 6x for controlled mid-range distances.

Objective diameter: 24 mm – typical for compact LPVOs.

Image plane: second focal plane, SFP – reticle stays the same size, MRAD values are correct at 6x.

Reticle: VMR-2 MRAD, illuminated – MRAD references for holdover and wind corrections.

Illumination: 11 brightness levels according to specs – relevant for changing light conditions.

Eye relief: approx. 101.6 mm – comfortable for quick acquisition and higher-recoil setups.

Field of view at 100 m: approx. 38.3 m to 6.8 m – wide at 1x, controlled at 6x.

Tube diameter: 30 mm – wide selection of mounts and rings.

Turret style: covered turrets – practical for hunting, transport, and dynamic use.

Click value: 0.2 MRAD – equals 2 cm at 100 m, 6 cm at 300 m, and 10 cm at 500 m per click.

Adjustment per revolution: 20 MRAD – large correction range per turn, especially useful when zeroing.

Parallax: fixed at approx. 91.4 m – typical for LPVOs and the intended use range.

Objective outer diameter: approx. 32.8 mm – relevant for mounting height and distance to the firearm.

Ocular outer diameter: approx. 46.0 mm – important for handling, mounting position, and accessories.

Length: approx. 256.5 mm – compact for a high-quality 1-6x LPVO.

Weight: approx. 610 g – robust and powerful, but not an ultralight minimalist optic.

Housing material: one-piece machined aircraft aluminum – relevant for stability and repeatability.

Battery: CR2032 – powers the reticle illumination.

Included

Vortex Razor HD Gen II-E 1-6x24 VMR-2 MRAD scope
Sunshade
Throw Lever
Protective caps
Cleaning cloth
Product documents

Note on SFP, MRAD, and mounting:
The MRAD hold values of the VMR-2 reticle are correct at 6x on this SFP optic. Also check mounting height, eye relief, and ring diameter before setup. If you expect FFP reticle values at every magnification or want to consistently work at 8x to 10x, you should rather consider a suitable Gen-III LPVO.

FAQ

What is the main difference between VMR-2 MRAD and a simple BDC reticle?
The VMR-2 MRAD works with clear MRAD references. You can use hold points and wind corrections more transparently than with a pure BDC reticle but must observe the SFP rule.

At which magnification are the MRAD values correct?
On this SFP optic, the MRAD hold values are correct at maximum magnification, i.e., at 6x. At other settings, they remain optically visible but are not correct to scale.

Is the Razor HD Gen II-E 1-6x24 suitable for driven hunting?
Yes, if the setup fits. 1x, wide field of view, and illumination are strong advantages. At the same time, it remains an LPVO with mounting and shooting position requirements, not a simple red dot sight.

Why not just buy a 1-10x right away?
A 1-10x offers more magnification
sreserve and mostly FFP logic. The 1-6x Gen II-E is more classic for this, very fast, proven, and with a constant SFP reticle at 1x especially comfortable.

Which mount do I need?
You need a suitable 30mm mount or 30mm rings. Crucial are the mounting height, eye relief, platform, and whether the optic is used for hunting, dynamic, or sporting purposes.