Vortex Sport Cantilever Mount 30 mm – 2" Offset

Eine scope mount doesn’t just decide whether the optic stays in place. It also determines if eye relief, head position, and cheek weld really fit together. The Vortex Sport Cantilever Mount is built exactly for this point: 2-inch offset, Picatinny compatibility, 6061 aluminum, and a center scope height of 38.1 mm create a clean base for modern rifle setups.

Important Features

Sport Cantilever Mount for scopes.
2-inch offset for better eye position and proper eye relief.
Made from 6061 aluminum with matte black anodized finish.
Suitable for Picatinny rails.
Center scope height: 38.1 mm from base rail to center of optic.
Laser-engraved torque specifications.
Available tube diameters: 25.4 mm, 30 mm, and 34 mm.

Our Assessment
The Sport Cantilever Mount solves a typical mounting problem: many scopes are technically secure but ergonomically not ideal. If the eye relief doesn’t fit, the shooter slips into an unnatural head position. The 2-inch offset helps position the optic further forward without having to improvise with individual rings.
This is especially practical for AR-oriented setups, sporty rifles, and range applications. The mount combines height, forward offset, and Picatinny interface in one component. This makes the setup cleaner, more reproducible, and less prone to typical mounting errors.

Black-Raptor Quick Summary

Buy if: you want a lightweight, stable Picatinny cantilever mount with 2-inch offset and clear mounting height.
Don’t buy if: you need separate rings, an extremely low hunting mount, or a system without a Picatinny rail.

Important Considerations Before Purchase
The tube diameter of your scope is crucial. The mount is available in 25.4 mm, 30 mm, and 34 mm. This value must fit securely before purchase. Also, the 38.1 mm center height should match cheek weld, stock line, and desired head position.

Instructor/Practical Tip
A good mount is not only tightened but also properly set up. First adjust eye relief and horizontal alignment, then tighten the ring screws evenly in a cross pattern. A torque wrench is no joke for optic mounts but prevents returns and frustration.

Comparison Box

Against individual rings: simpler than a complete solution with fixed offset and uniform height.

Against low hunting mounts: better for Picatinny setups with a more upright cheek weld.

Against heavy precision mounts: lighter and more reduced but less massive.

Use Cases

Range rifles with Picatinny rail.
AR-style setups needing more eye relief.
LPVO and scope mounting on sporty platforms.
Setups where a defined center height is important.
Customers wanting a straightforward complete mount instead of individual rings.

Features & Construction
According to Sevenoaks, the mount is made from 6061 aluminum and uses a matte black anodized finish. The 2-inch offset supports ergonomic optic positioning. Laser-engraved torque specs help with clean mounting. The Picatinny interface makes it suitable for corresponding rail systems.

Technical Data

Manufacturer: Vortex
Model: Sport Cantilever Mount
Mount type: Cantilever scope mount
Offset: 2 inches
Material: 6061 aluminum
Finish: matte black anodized
Rail standard: Picatinny
Center scope height: 38.1 mm
Tube diameter variants: 25.4 mm, 30 mm, 34 mm
Mount base torque: 30 in-lbs / 3.4 Nm
Ring screw torque: 15-18 in-lbs / 1.7-2 Nm

Scope of Delivery

1x Vortex Sport Cantilever Mount
2x additional Torx T-25 screws
1x Torx T-25 wrench

Note: Check tube diameter, Picatinny interface, and desired mounting height before purchase. The right mount directly affects aiming
impact, eye relief, and repeatability.
FAQ
For which rail is the Vortex Sport Cantilever Mount intended? According to Sevenoaks, it is suitable for Picatinny rails.
What barrel diameters are available? The mount is available in 25.4 mm, 30 mm, and 34 mm.
How high is the optic mounted? The center scope height is 38.1 mm from the base of the rail to the center of the optic, according to Sevenoaks.
What torque is specified? The base is fastened with 30 in-lbs / 3.4 Nm, the rings with 15-18 in-lbs / 1.7-2 Nm.
What is included in the delivery? One Sport Cantilever Mount, two additional Torx T-25 screws, and one Torx T-25 key.