ERATAC Red Dot Sight for Universal Interface – Lumifix & Steel

.br-product{font-family:Arial,Helvetica,sans-serif;line-height:1.6;color:#222;}
.br-product h2{font-size:1.2rem;margin-top:28px;}
.br-product ul{padding-left:18px;}
.br-product .info-box{background:#ffdddd;border-left:6px solid #c40000;padding:12px;margin:20px 0;}
.br-product .tip-box{background:#eef6ff;border-left:6px solid #2a6fdb;padding:12px;margin:20px 0;}
.br-product .trust-box{background:#eaf7ea;border-left:6px solid #2f8f2f;padding:12px;margin:20px 0;}
.br-product .compare-box{background:#f5f5f5;border-left:6px solid #444;padding:12px;margin:20px 0;}
.br-product details{background:#f2f2f2;padding:10px;margin-bottom:8px;border-radius:4px;}
.br-product summary{font-weight:600;cursor:pointer;}

ERATAC emergency sight for universal interface – Lumifix & steel – emergency sight for ERATAC universal interface with 1-MOA click adjustment

When the main optic fails, an emergency sight only helps if it is accessible and zeroed.
ERATAC emergency sight for universal interface – Lumifix & steel is a mechanical ERATAC emergency sight for compatible universal interfaces on ERATAC mounts. Depending on the variant, it comes with a steel post front sight or a red Lumifix illuminated front sight.

It is not a classic Picatinny backup sight, but a solution for the ERATAC universal interface on the optic mount. Therefore, the mount series must fit and the sight must be freely visible when shouldered.

Important note for classification:
Check before purchase: ERATAC universal interface, mount series, space above the optic, sight line, front sight variant, usability of the turrets, and whether the emergency sight can be zeroed after mounting. Variants: Size: M.lumifix illuminated front sight, M. steel post front sight.

What makes this product technically special:
✔ Universal interface: uses compatible ERATAC mounts instead of a separate Picatinny rail.
✔ 1-MOA click adjustment: elevation and windage can be adjusted in defined steps.
✔ 240 cm / 100 m adjustment range according to ERATAC: large range for mechanical backup adjustment.
✔ Steel or Lumifix front sight: variant decides between classic post front sight and more visible illuminated insert.
✔ Optic-close backup: emergency sight sits directly on the mounting system and saves an additional rail position.

Why this product?

This emergency sight exists for setups where a classic Picatinny backup sight is not practical or possible. It provides a mechanical fallback directly on compatible ERATAC mounts – but must be taken as seriously as any other sight.

Mechanical backup: independent of electronics or battery.

Defined click adjustment: not just roughly mounted, but adjustable.

Close to mount: uses existing ERATAC interface.

Variant choice: steel front sight or Lumifix depending on visibility and use.

Trainer tip: don’t just mount the emergency sight – zero it
An emergency sight that has never been zeroed is no backup. After mounting, the point of impact must be checked and documented. Also check if you can clearly see and operate the sight with the main optic, caps, and accessories mounted. For Lumifix variants, test visibility under different lighting conditions. Illuminated front sight does not replace lighting or training.

Our assessment

The ERATAC emergency sight for universal interface is useful if you want a mechanical backup directly on the ERATAC mounting system. It is less useful if your mount does not have a suitable interface or if a classic Picatinny backup sight would be more accessible.

Useful for:

ERATAC mounts with universal interface
Precision and range setups with mechanical fallback
Users who really zero backup systems
Setups where Picatinny backup sights have no space

Less useful for:

Mounts without suitab
send Universal interface
Users who do not zero the backup sight
Setups where the sight line is blocked
Applications where a classic Picatinny sight is more logical

Direct classification:
✔ ERATAC backup sight for universal interface – Lumifix & steel: useful as a mechanical backup on compatible ERATAC universal interface.
✔ Picatinny backup sighting: better if a free rail is available and the sight line should be set up classically.
The product is only worthwhile if interface, sight line, and zeroing are really planned.

Application scenarios

Range: realistically train main optic failure.

Long Range: mechanical backup for emergency operation on the mounting system.

Hunting: only useful if sight line and operation fit in practice.

Workbench: check setup with optic, caps, and accessories for clearance.

Practical tip: simulate sight line before purchase
Hold the firearm with mounted optic in the real shooting position and check if a sight on the mount would even be reasonably reachable. With tall turrets, large eyepieces, or left-side illumination, an actually fitting interface can be practically hard to use.

Features & construction

Interface: ERATAC universal interface – not Picatinny.

Click value: 1 MOA – about 2.91 cm at 100 m per click.

Adjustment range: 240 cm / 100 m according to ERATAC – relevant for zeroing the backup sight.

Variants: Size: M.lumifix luminous front sight, M. steel post front sight.

Practical limit: only useful if zeroed and visibly mounted.

Technical data

Brand: ERATAC / Recknagel.

Product type: backup sight for universal interface.

Click value: 1 MOA – approx. 2.91 cm at 100 m.

Adjustment range: 240 cm / 100 m according to ERATAC.

Variants: Size: M.lumifix luminous front sight, M. steel post front sight.

Size: M.lumifix luminous front sight, M. steel post front sight – determines the suitable version, not just the look.

Manufacturer / article numbers: M.lumifix luminous front sight: T0953-0016; M. steel post front sight: T0952-0016.

Scope of delivery

1x ERATAC backup sight for universal interface – Lumifix & steel in chosen variant

Not included:
No ERATAC main mount, no optic, no Picatinny rail, and no tools. The matching universal interface must be available.

FAQ

Does the backup sight fit every ERATAC mount?
No. It only fits compatible ERATAC universal interfaces. Do not confuse with T7 and other interfaces.

Does the backup sight need to be zeroed?
Yes. Without zeroing, it is not a reliable backup.

What does 1 MOA click value mean?
1 MOA corresponds to about 2.91 cm at 100 m. This allows defined correction of the backup sight in height and windage.

Steel front sight or Lumifix – which is more useful?
Steel is classic and clear, Lumifix can be more quickly visible in certain lighting conditions. The choice depends on use and light.

When is this backup sight not useful?
When the interface is missing, the sight line is blocked, or a classic Picatinny backup sight fits better.

Conclusion: The ERATAC backup sight for universal interface is a serious mechanical backup for suitable ERATAC setups. It is only strong when visibly mounted and zeroed.