Vector Optics SCRD-61 Maverick-IV 1x20 Mini SOP

Vector Optics · Maverick Gen IV
SCRD-61 Maverick-IV 1×20 Mini SOP
Compact 1×20 red dot with 3-MOA dot, side-accessible CR2032 battery, and two included Weaver/Picatinny mounting heights. The purchase decision mainly depends on which sight line your setup needs.

3 MOA red dot 1 MOA/click adjustment CR2032 side battery access High + Low two mounting heights

Does the Maverick-IV fit your setup?


Fits well if … you’re looking for a compact tube red dot for Weaver/Picatinny rails and want to choose between a low mount and a higher QD cantilever solution.

Fits less if … you expect optical magnification, a direct pistol footprint mount, or an ultra-light micro dot. The SCRD-61 is a standalone 1×20 rail sight.

The crucial differences
ede


3-MOA Dot The manufacturer positions 3 MOA as a middle ground between quick perception and limited target coverage.

Two Mounting Heights With Low Mount and QD-Cantilever Mount, the sight line can be adjusted to different rail and cheek rest heights.

Side Battery The CR2032 is located on the side. According to the manufacturer, a battery change does not require removing the optic from the mount.

Mounting & Variant Choice

Vector Optics offers the SCRD-61 model with Weaver rail attachment. The scope of delivery includes a QD-Cantilever mount and a Low Mount. The manufacturer states 41 mm from the base to the center of the dot for the higher configuration; the Low Mount value listed in the Shopify data is 21 mm.
The right choice is therefore not a question of "higher is better" or "lower is better": decisive are rail position, desired sight line, and the ergonomics of the specific system.

Limits, Disadvantages & Avoiding Bad Purchases


No Magnification: The 1×20 is intended for a direct sight picture and does not replace a magnifying optic.

140 g without mount: The manufacturer states 140 g net weight without mount. Those wanting to build as light as possible will find smaller micro-dots.

Footprint ≠ Rail: Vector Optics does not list a direct pistol footprint for the SCRD-61; compatibility is achieved via the included Weaver/Picatinny mounts.

Realistic Parallax Assessment: Officially stated is less than 3 MOA deviation at 50 yd. "Parallax free" should therefore not be understood as absolutely error-free representation from every head position.

Do Not Mix IP Ratings: Manufacturer data lists different IP ratings for the SCRD-61. We therefore deliberately do not promise a specific protection class here as a purchase argument.

Technical Data with Practical Interpretation


Magnification 1× – unmagnified sight picture for quick orientation.

Objective 20 mm – compact 1×20 design.

Dot 3 MOA, red – good middle ground between visibility and target coverage.

Click Value 1 MOA – defined, audible adjustment steps according to the manufacturer.

Adjustment Range > 45 MOA height and windage – official manufacturer value.

Brightness 10 levels – adjust to ambient brightness.

Battery CR2032, side – change without removing the optic intended.

Eye Relief Unlimited – typical for a red dot; head position remains comparatively free.

Length 68 mm – very compact design.

Weight 140 g net without mount – manufacturer value, do not confuse with mounted overall configuration.

Housing 6061-T6 aluminum with rubberized outer shell in FDE.

Mounting Weaver / 21 mm rail via QD-Cantilever or Low Mount.

Scope of Delivery

Vector Optics Maverick-IV 1×20 Mini SOP
Honeycomb sunshade
QD-Cantilever Weaver mount
Low Weaver Mount
Flip-up protective caps
Cleaning cloth

Safe Use & BR Classification

Before use, check mounting, locking, battery compartment, and function. After each mounting or a change of mounting height, check point of impact. Only choose brightness high enough that the dot remains clearly visible without unnecessary blooming.
Black-Raptor Classification: The added value of the SCRD-61 lies less in a single data value than in the combination of compact 1×20 housing, 3-MOA dot, side battery, and two mounting heights. Exactly these points should fit the existing setup before purchase.

FAQ
What dot size does the SCRD-61 have? Vector Optics states a red 3-MOA dot for the exact model designation SCRD-61. What battery is needed? A CR2032. The battery compartment is located on the side. Are two mounts included? Yes. Vector Optics lists a QD-Cantilever Weaver mount and a Low Weaver Mount. Is this a direct pistol optic? No. The manufacturer does not list a direct footprint for the SCRD-61; attachment is via Weaver/Picatinny rail mounts. What must be done after changing the mount height?
agehöhe geprüft werden? Die Optik muss mechanisch sicher sitzen und die Treffpunktlage sollte erneut kontrolliert werden.

Black-Raptor-Fazit: The SCRD-61 is a solid choice if you’re looking for a compact 1×20 red dot with a 3-MOA dot, side battery access, and two rail mounting heights. If you need direct plate mounting, magnification, or minimal micro-dot weight, you should specifically choose a different design.
SKU / Manufacturer ID: SCRD-61 · Purchase-critical details specifically checked against the official Vector-Optics model page.