Precise Hunting Clamp Sleeve

The clamping sleeve is designed for mounting on the scope. It is slid over the objective lens of the scope for a length of 40 mm (or 35 mm for diameters 30, 34, and 36 mm) and screwed in place. It remains permanently on the scope. The total diameter of clamping sleeves up to 61 mm objective diameter is 65 mm at the locking ring. A protective film is applied to the contact surfaces of the clamping sleeve to the scope objective, preventing damage to the scope and increasing adhesion to the scope. This ensures that the clamping sleeve and thus the attachment device itself are not pulled off the scope even with powerful calibers. A special internal contour (three-point support on the scope) ensures precise alignment of the attachment device to the scope. The bayonet on the front end of the clamping sleeve is the base for a...