Q-WORKS X Pro Silencer - Raw Titanium - .30 - M14x1 (LH)

Der Q-WORKS X Pro is a continuous-duty suppressor for semi-automatic platforms where maximum stability, recoil control, and optimized gas behavior are required. Its highly efficient gas flow management is designed for very low recoil and high stability in dynamic use.

The X Pro is available in two material variants. The version made of Titanium Grade 5 combines high durability with a comparatively low weight of 280 g. For applications under the highest thermomechanical stress, Q-WORKS also offers the X Pro in Haynes® 282. This nickel superalloy retains its strength even under extremely high thermal and mechanical stress.

Both variants are manufactured using Q-WORKS sintering technology. The X Pro has a length of 130 mm and a diameter of 46 mm. The manufacturer specifies the sound suppression at 25 dB.

The titanium version corresponds to the Q-WORKS load class II. The Haynes® 282 version achieves load class III for extreme thermomechanical stresses. According to Q-WORKS, the design was validated in SOCOM-inspired tests.

The X Pro is designed for the Q-WORKS Quick-Detach system with muzzle brake and repeatable alignment. Additionally, it is compatible with the Q-WORKS Direct Mount.

Features

Continuous-duty suppressor for semi-automatic platforms
Highly efficient gas flow management
Designed for very low recoil and maximum stability
Available in Titanium Grade 5 or Haynes® 282
Haynes® 282 for highest thermomechanical stresses
25 dB sound suppression
130 mm length
280 g in Titanium Grade 5
540 g in Haynes® 282
Q-WORKS Quick Detach with repeatable alignment
Quick Detach with muzzle brake
Compatible with Direct Mount
Load class II in Titanium
Load class III in Haynes® 282
Validated in SOCOM-inspired tests
Made in Germany

Technical Data

ManufacturerQ-WORKS
ModelX Pro
TypeContinuous-duty suppressor
Caliber.223 / 6.5 mm (.26) / .30 / .338 / .38
Length130 mm
Diameter46 mm
Weight Titanium280 g + mount
Weight Haynes® 282540 g + mount
Sound Suppression25 dB*
MaterialTitanium Grade 5 or Haynes® 282
ManufacturingSintering technology
Load Class TitaniumClass II
Load Class Haynes® 282Class III
MountDirect Mount / Q-WORKS Quick Detach
FinishesRaw / Cerakote Black / Sand (C-267) / Green (C-241)
Made inMade in Germany

* Sound suppression measured by the manufacturer indoors, average of 5 shots in caliber .223, measured 1 m from the barrel.

Available Mount Threads

M13×1
M13×1 LH
M14×1
M14×1 LH
M15×1
M16×1
M17×1
M18×1
5/8×24
1/2×28
1/2×20

Note
Suppressors are essential firearm parts under German weapons law. Acquisition and possession require a permit.