Q-WORKS X Pro Silencer - Raw Titanium - .338 - M13x1

The Q-WORKS X Pro is a sustained-fire suppressor for semi-automatic platforms where maximum stability, recoil control and optimized gas behavior are required. Its highly efficient gas flow management is designed for very low recoil and high stability in dynamic use.

The X Pro is available in two material variants. The Titanium Grade 5 version combines high load capacity with a comparatively low weight of 280 g. For applications under the highest thermomechanical stress, Q-WORKS also offers the X Pro in Haynes® 282. This nickel superalloy retains its strength even under extremely high thermal and mechanical loads.

Both variants are manufactured using Q-WORKS sintering technology. The X Pro has a length of 130 mm and a diameter of 46 mm. The manufacturer specifies sound suppression of 25 dB.

The Titanium version corresponds to the Q-WORKS load class II. The Haynes® 282 version reaches load class III for extreme thermomechanical loads. According to Q-WORKS, the design was validated in SOCOM-inspired tests.

The X Pro is designed for the Q-WORKS Quick-Detach system with muzzle brake and repeatable alignment. It is also compatible with Q-WORKS Direct Mount.

Features

- Sustained-fire suppressor for semi-automatic platforms
- Highly efficient gas flow management
- Designed for very low recoil and maximum stability
- Available in Titanium Grade 5 or Haynes® 282
- Haynes® 282 for highest thermomechanical stresses
- 25 dB sound suppression
- 130 mm length
- 280 g in Titanium Grade 5
- 540 g in Haynes® 282
- Q-WORKS Quick Detach with repeatable alignment
- Quick Detach with muzzle brake
- Compatible with Direct Mount
- Load class II in Titanium
- Load class III in Haynes® 282
- Validated in SOCOM-inspired tests
- Made in Germany

Technical data

Manufacturer Q-WORKS
Model X Pro
Type Sustained-fire suppressor
Caliber .223 / 6.5 mm (.26) / .30 / .338 / .38
Length 130 mm
Diameter 46 mm
Weight Titanium 280 g + mounting
Weight Haynes® 282 540 g + mounting
Sound suppression 25 dB*
Material Titanium Grade 5 or Haynes® 282
Manufacturing Sintering technology
Load class Titanium Class II
Load class Haynes® 282 Class III
Mounting Direct Mount / Q-WORKS Quick Detach
Finishes Raw / Cerakote Black / Sand (C-267) / Green (C-241)
Production Made in Germany

* Sound suppression according to manufacturer measured indoors, average of 5 shots in caliber .223, measured 1 m from the barrel.

Available mounting threads

M13×1
M13×1 LH
M14×1
M14×1 LH
M15×1
M16×1
M17×1
M18×1
5/8×24
1/2×28
1/2×20

Note
Suppressors are essential firearm components under German weapons law. Acquisition and possession require a permit.