Q-WORKS X Pro Silencer - Raw Titanium - .38 - M13x1 (LH)

The Q-WORKS X Pro is a continuous-duty suppressor for semi-automatic platforms where maximum stability, recoil control and optimized gas behavior are required. Its highly efficient gas-flow management is designed for very low recoil and high stability in dynamic use.

The X Pro is available in two material variants. The Titanium Grade 5 version combines high strength with a comparatively low weight of 280 g. For applications under the highest thermomechanical stress, Q-WORKS also offers the X Pro in Haynes® 282. This nickel superalloy retains its strength even under extremely high thermal and mechanical loads.

Both variants are manufactured using Q-WORKS sintering technology. The X Pro has a length of 130 mm and a diameter of 46 mm. The manufacturer states sound reduction of 25 dB.

The Titanium Grade 5 version corresponds to Q-WORKS load class II. The Haynes® 282 version reaches load class III for extreme thermomechanical stresses. According to Q-WORKS, the design was validated in SOCOM-inspired tests.

The X Pro is designed for the Q-WORKS Quick-Detach system with muzzle brake and repeatable alignment. It is also compatible with Q-WORKS Direct Mount.

Features

Continuous-duty suppressor for semi-automatic platforms
Highly efficient gas-flow management
Designed for very low recoil and maximum stability
Available in Titanium Grade 5 or Haynes® 282
Haynes® 282 for highest thermomechanical stresses
25 dB sound reduction
130 mm length
280 g in Titanium Grade 5
540 g in Haynes® 282
Q-WORKS Quick Detach with repeatable alignment
Quick Detach with muzzle brake
Compatible with Direct Mount
Load class II in Titanium
Load class III in Haynes® 282
Validated in SOCOM-inspired tests
Made in Germany

Technical specifications

Manufacturer Q-WORKS
Model X Pro
Type Continuous-duty suppressor
Caliber .223 / 6.5 mm (.26) / .30 / .338 / .38
Length 130 mm
Diameter 46 mm
Weight Titan 280 g + mount
Weight Haynes® 282 540 g + mount
Sound reduction 25 dB*
Material Titanium Grade 5 or Haynes® 282
Manufacturing Sintering technology
Load class Titan Class II
Load class Haynes® 282 Class III
Mounting Direct Mount / Q-WORKS Quick Detach
Finishes Raw / Cerakote Black / Sand (C-267) / Green (C-241)
Production Made in Germany

* Sound reduction measured by the manufacturer indoors, average of 5 shots in caliber .223, measured 1 m from the barrel.

Available mounting threads

M13×1
M13×1 LH
M14×1
M14×1 LH
M15×1
M16×1
M17×1
M18×1
5/8×24
1/2×28
1/2×20

Note
Suppressors are essential firearm parts under German weapons law. Purchase and possession require a permit.