Filamelt ammunition box / .416 Barrett Long Range Edition / 'folding / locking lid' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for .416 Barrett with flip/latch lid
Caliber-specific storage for .416 Barrett – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting ground.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does this fit my ammunition?


Caliber

.416 Barrett (also known as: 10.4x83)


Max. cartridge length

up to 126 mm (max. OAL according to CIP, dimension L6) Different dimensions or special loading? Contact us – we will discuss your individual requirements.


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your .416 Barrett ammunition?


Variant
Outer dimension
Weight
Purpose


10 cartridges
12.1 × 7.6 × 14.8 cm
305 g
Range day / on the go


25 cartridges
14.2 × 12.1 × 14.8 cm
501 g
Training session


50 cartridges
24.6 × 12.1 × 14.8 cm
764 g
full training day


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the .416 Barrett box special


Caliber-specific fit
Precisely fitting slots according to CIP standard dimension – each cartridge sits firmly in its place, play and rattling reduced to a minimum. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Strong wall thickness, densely printed layers – the box holds reliably together in the gun cabinet, range bag, and on the go. Reusable, not a disposable carton.


Caliber marking in multicolor print
The caliber designation is printed directly in multicolor on the box – permanent, without stickers and without engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting ground, and range bag.


Made in Westerwald

We print every box here in Westerwald – no container import, no anonymous mass production. Printing is largely done with solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the .416 Barrett box


Do my reloads fit too?
The box is designed for CIP-compliant .416 Barrett (OAL up to 126 mm according to CIP). Custom loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
They are well suited for transport in the range bag – as an organizing and storage box. They do not replace a legally required safety container (WaffG/AWaffV) and are not hazardous material packaging.


Can the B
ox heat (e.g. the summer trunk)?
Designed for room and cabinet temperature and permanently dimensionally stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, is better avoided.


What are tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still fit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching .416 Barrett box – small for the range bag, large for stock in the gun cabinet.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container within the meaning of § 36 WaffG / § 13 AWaffV; it does not replace the prescribed ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.