Filamelt ammunition box / 9x19mm Para - Luger / 'Folding / latch cover' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammunition box for 9x19mm Para - Luger with flip/latch lid
Caliber-specific storage for 9x19mm Para - Luger – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun cabinet, range, and hunting ground.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does this fit my ammunition?


Caliber
9x19mm Para - Luger


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 9x19mm Para - Luger ammunition?


Variant
Outer dimension
Weight
For what


25 cartridges
9.4 × 7.4 × 5.2 cm
97 g
Training unit


60 cartridges
15.8 × 7.4 × 5.4 cm
156 g



120 cartridges
15.8 × 13.7 × 5.4 cm
263 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 9x19mm Para - Luger box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges find firm hold, play and rattling are minimized as much as possible. Dimensionally accurate design, not improvised.


Hinge lid with latch lock
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch lock at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor print instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting ground, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous imports. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 9x19mm Para - Luger box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch lock at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved dangerous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Yes, with usual storage it remains dimensionally stable. High continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not intended for that.


What are the tolerances in 3D printing?
In 3D-D
Tolerances in manufacturing are normal. This does not affect the secure fit of the cartridges; a slight play remains due to the design, and the bullet tip is protected as much as possible.



No more loose cartridges
Choose your capacity for 9x19mm Para - Luger – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.