Filamelt ammunition box / 9.3x62 / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 9.3x62 with flip/latch lid
The 9.3x62 box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting grounds.
The 9.3x62 is fired from long guns.


✔ Made in Germany

✔ Dimensionally accurate 3D print

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does it fit my ammunition?


Caliber
9.3x62


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 9.3x62 ammunition?


Variant
Outer dimension
Weight
For what


50 cartridges
15.8 × 7.4 × 10.3 cm
241 g
full training day


100 cartridges
15.8 × 13.7 × 10.2 cm
447 g
monthly supply / storage


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 9.3x62 box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges are held firmly, play and rattling are minimized as much as possible. Dimensionally accurate design, not improvised.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely fitting insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Thick walls, densely printed layers – the box holds together reliably in the gun cabinet, range bag, and on the go. Reusable, no disposable carton.


Caliber marking in multicolor print
The caliber designation is multicolor integrated directly into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized supply: uniformly labeled in the gun cabinet, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

From Westerwald, not from a container: We produce each box ourselves in 3D printing – largely with solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 9.3x62:


Slide lid (BBox) – space-saving, slides to the side instead of swinging open

Flip lid (ABox) – fully openable, cartridges openly ready to grab
Filamelt reloading board
Filamelt cartridge clip (caliber-specific)


Frequently asked questions about the 9.3x62 box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
For transport in the range bag, it is well suited – as an organizing and storage box. It does not replace a legally required safety container.
tnis (WaffG/AWaffV) and is not a dangerous goods packaging.


Is the box heat resistant (e.g. summer trunk)?
Designed for room and cabinet temperature and permanently dimensionally stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, is better avoided.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching 9.3x62 box – small for the range bag, large for storage in the gun cabinet.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container within the meaning of § 36 WaffG / § 13 AWaffV; it does not replace the prescribed ammunition storage and has no ADR/UN dangerous goods approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.