Filamelt ammunition box / 8x75 RS / 'folding / locking lid' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for 8x75 RS with flip/latch lid
Order for your 8x75 RS ammunition – custom-fit slots according to CIP dimensions, made with 3D printing in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and hunting grounds.

✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does this fit my ammunition?

Caliber
8x75 RS

Suitable for

Fit
Caliber-specific slots according to CIP standard dimensions; play and rattling minimized

All information according to official CIP data. If you notice an error, please let us know briefly.

Which size fits your 8x75 RS ammunition?

Variant
External dimensions
Weight
For

16 cartridges
9.4 × 7.4 × 11.5 cm
199 g

36 cartridges
15.8 × 7.4 × 11.5 cm
310 g

81 cartridges
15.8 × 13.7 × 11.5 cm
538 g

External dimensions = assembled box (L × W × H). Delivery without ammunition.

What makes the 8x75 RS box special

Caliber-specific fit
Slots designed according to CIP dimensions give each cartridge firm, defined hold – play and rattling are minimized. Constructed according to CIP standard dimensions for 8x75 RS.

Hinged lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.

Stable & durable
Printed solidly with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.

Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.

For sport shooters, hunters, and reloaders

Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, hunting grounds, and range bag.

Made in Westerwald

From Westerwald, not from a container: We produce each box ourselves with 3D printing – largely powered by solar energy from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.

Frequently asked questions about the 8x75 RS box

Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.

Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinged lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.

Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous materials packaging.

Can the box withstand heat (e.g., summer trunk)?
Yes, it remains dimensionally stable under normal storage. High continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not intended for that.

What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – a minimal residual play remains by design.
ingt, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching 8x75 RS box – small for the range bag, large for stock in the gun safe.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.