Filamelt ammunition box / 7x57R / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 7x57R with flip/latch lid
Order for your 7x57R cartridges – custom-fit slots according to CIP dimensions, made with 3D printing in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and field.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no import goods

Does this fit my ammunition?


Caliber
7x57R


Suitable for


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 7x57R ammunition?


Variant
Outer dimension
Weight
For what


50 cartridges
15.8 × 7.4 × 9.7 cm
253 g
full training day


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 7x57R box special


Caliber-specific fit
Slots designed according to CIP dimensions give each cartridge firm, defined hold – play and rattling are minimized. Constructed according to CIP standard dimensions for 7x57R.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber designation is multicolored and directly integrated into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, field, and range bag.


Made in Westerwald
We print every box here in Westerwald – no container import, no anonymous mass production. Printing is done largely with solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Frequently asked questions about the 7x57R box


Do my reloads fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
They are well suited for transport in the range bag – as an organizing and storage box. They do not replace a legally required safety container (WaffG/AWaffV) and are not hazardous material packaging.


Can the box withstand heat (e.g. summer trunk)?
Designed for room and cabinet temperature and permanently dimensionally stable there. PLA remains temperature sensitive: prolonged heat, such as in a heated summer trunk, should be avoided.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still sit firmly in the slot – a minimal residual play remains by design, and unn...
ger Druck auf die Geschossnase wird soweit möglich vermieden.



Schluss mit losen Patronen
Such dir die passende Größe für 7x57R aus – von der handlichen Range-Box bis zum Vorratsformat für den Schrank.


Wichtige Hinweise: Lieferung erfolgt ohne Munition. Diese Box dient der Organisation und dem Transport und ist kein Sicherheitsbehältnis im Sinne von § 36 WaffG / § 13 AWaffV; sie ersetzt keine vorgeschriebene Munitionsaufbewahrung und besitzt keine ADR-/UN-Gefahrgutzulassung. Bitte prüfe vor Nutzung die Eignung für deine konkrete Patrone. Lizenziertes Design: CincinnatiDesigns. Dieses Produkt wird in Lizenz gefertigt; Marken- und Namensrechte verbleiben bei den jeweiligen Inhabern.