Filamelt ammunition box / 7mm-08 Remington / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 7mm-08 Remington with flip/latch lid
The 7mm-08 Remington box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting ground.
The 7mm-08 Remington is fired from a long gun.


✔ Made in Germany

✔ Dimensionally accurate 3D print

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does it fit my ammunition?


Caliber
7mm-08 Remington


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 7mm-08 Remington ammunition?


Variant
Outer dimension
Weight
For what


50 cartridges
15.8 × 7.4 × 9.0 cm
238 g
full training day


Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 7mm-08 Remington box special


Caliber-specific fit
Slots designed according to CIP dimensions give each cartridge firm, defined hold – play and rattling are minimized. Constructed according to CIP standard dimensions for 7mm-08 Remington.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber designation is multicolor directly integrated into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting ground, and range bag.


Made in Westerwald

Made in own production in Westerwald, piece by piece – instead of anonymous import goods. The 3D printing runs largely on solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 7mm-08 Remington:


Slide lid (BBox) – space-saving, slides to the side instead of swinging open

Flip lid (ABox) – fully openable, cartridges openly ready to grab
Filamelt reloading board
Filamelt cartridge clip (caliber-specific)


Frequently asked questions about the 7mm-08 Remington box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Own loadings with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container.
in accordance with WaffG/AWaffV and not an approved dangerous goods packaging.


Does the box tolerate heat (e.g. the summer trunk)?
Yes, it remains dimensionally stable under normal storage. However, high continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not designed for that.


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still fit firmly in the slot – a minimal play remains by design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Grab the matching 7mm-08 Remington box – small for the range bag, large for stock in the gun safe.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN dangerous goods approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.