Filamelt ammunition box / 7.62x54R / 'Folding / Locking lid' / cartridge box, Ammo Box

Filamelt Cartridge Box / Ammo Box
Ammo box for 7.62x54R with flip/latch lid
Order for your 7.62x54R cartridges – custom-fit slots according to CIP dimensions, 3D printed in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and hunting ground.
The 7.62x54R is fired from long guns.


✔ Made in Germany

✔ Dimensionally accurate 3D print

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does this fit my ammunition?


Caliber
7.62x54R


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 7.62x54R ammunition?


Variant
Outer dimension
Weight
For what


36 cartridges
15.8 × 7.4 × 9.7 cm
241 g



Outer dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 7.62x54R box special


Caliber-specific fit
Custom-fit slots according to CIP standard dimension – each cartridge sits firmly in its place, play and rattling reduced to a minimum. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Sturdily printed with thick walls: holds together in the gun cabinet, range bag, and at the range. Reusable instead of disposable box.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun cabinet, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammo count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready for range, hunting ground, and range bag.


Made in Westerwald

We print every box here in Westerwald – no container import, no anonymous mass production. Printing is done largely with solar power from our own 22-kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 7.62x54R:


Slide lid (BBox) – space-saving, slides to the side instead of flipping open

Flip lid (ABox) – fully foldable, cartridges openly ready to grab
Filamelt reloading board


Frequently asked questions about the 7.62x54R box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organizing and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous goods packaging.


Can the box withstand heat (e.g. summer trunk)?
Designed for room and cabinet temperature and permanently shape-stable there. PLA remains temperature sensitive:
longer heat, for example in a heated summer trunk, is better avoided.


What are tolerances in 3D printing?
Small manufacturing tolerances are normal in 3D printing. This does not affect the secure fit of the cartridges; a slight play remains due to the design, and the bullet nose is protected as much as possible.



No more loose cartridges
Choose the right size for 7.62x54R – from the handy range box to the storage format for the cabinet.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the prescribed ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.