Filamelt ammunition box / 7.62x39 / 'folding / latch cover' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 7.62x39 with flip/latch lid
Order for your 7.62x39 cartridges – custom-fit slots according to CIP dimensions, made with 3D printing in Germany. Instead of loose cartridges and colorful manufacturer boxes, a uniform system for cabinet, range, and field.
The 7.62x39 is fired from long guns.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no imported goods

Does this fit my ammunition?


Caliber
7.62x39


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 7.62x39 ammunition?


Variant
External dimension
Weight
For what


50 cartridges
15.8 × 7.4 × 7.5 cm
201 g
full training day


100 cartridges

320 g
monthly supply / storage


External dimension = assembled box (L × W × H). Delivery without ammunition.


What makes the 7.62x39 box special


Caliber-specific fit
Custom-fit slots according to CIP standard dimension – each cartridge sits firmly in its place, play and rattling reduced to a minimum. The shape follows the caliber, not the drawer.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the latch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber marking is multicolored and directly integrated into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor print instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized supply: uniformly labeled in the gun cabinet, ready for range, field, and range bag.


Made in Westerwald

From Westerwald, not from a container: We produce each box ourselves with 3D printing – largely powered by solar energy from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 7.62x39:


Slide lid (BBox) – space-saving, slides to the side instead of swinging open

Flip lid (ABox) – fully openable, cartridges openly ready to grab
Filamelt reloading board
Filamelt cartridge clip (caliber-specific)


Frequently asked questions about the 7.62x39 box


Do my reload cartridges fit?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the latch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes. As a storage and organization box, it accompanies you in the range bag. However, it is not a security container according to WaffG/AWaffV and not an approved hazardous materials packaging.


Can the box withstand heat (e.g., the S
ommer-trunk)?
With normal room and cabinet storage, the box remains permanently dimensionally stable. Like all PLA materials, it is not made for permanent heat – it should not be left for extended periods in a hot summer trunk (well above 50 °C).


What are the tolerances in 3D printing?
Due to manufacturing, slight tolerances are possible. The cartridges still fit firmly in the slot – a minimal play remains due to the design, and unnecessary pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose the right size for 7.62x39 – from the handy range box to the storage format for the cabinet.


Important notes: Delivery is without ammunition. This box is for organization and transport and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.