Filamelt ammunition box / 6.5mm Grendel / 'folding / locking lid' / cartridge box, ammo box

Filamelt Cartridge Box / Ammo Box
Ammunition box for 6.5mm Grendel with flip/latch lid
Caliber-specific storage for 6.5mm Grendel – precisely made and Made in Germany. No more loose cartridges and packaging chaos: a uniform system for the gun safe, range, and hunting grounds.
The 6.5mm Grendel is fired from long guns.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in the range · no import goods

Does this fit my ammunition?


Caliber
6.5mm Grendel


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; minimizes play and rattling


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 6.5mm Grendel ammunition?


Variant
External dimensions
Weight
For what


50 cartridges
15.8 × 7.4 × 7.8 cm
196 g
full training day


100 cartridges
15.8 × 13.7 × 7.8 cm
352 g
monthly supply / storage


External dimensions = assembled box (L × W × H). Delivery without ammunition.


What makes the 6.5mm Grendel box special


Caliber-specific fit
Slots designed to CIP dimensions give each cartridge firm, defined support – play and rattling are minimized. Constructed according to CIP standard dimensions for 6.5mm Grendel.


Hinge lid with latch closure
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch closure at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Strong walls, densely printed layers – the box holds reliably together in the gun safe, range bag, and on the go. Reusable, not a disposable carton.


Caliber marking in multicolor print
The caliber designation is multicolored and directly integrated into the box print – permanent, without stickers or engraving. In a full gun safe, you immediately grab the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized supply: uniformly labeled in the gun safe, ready to grab for range, hunting grounds, and range bag.


Made in Westerwald

We print every box here in Westerwald – no container import, no anonymous mass production. Printing is largely done with solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 6.5mm Grendel:


Slide lid (BBox) – space-saving, slides to the side instead of flipping open

Flip lid (ABox) – fully openable, cartridges openly ready to grab
Filamelt Reloading Board
Filamelt Cartridge Clip (caliber-specific)


Frequently asked questions about the 6.5mm Grendel box


Do my reload cartridges fit?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, please inquire briefly in advance.


Does the lid pop open in the backpack?
No. A latch closure at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organizing and storage box for the range bag. However, it is not a security container according to WaffG/AWaffV and no
Dangerous goods packaging.


Is the box heat resistant (e.g. the summer trunk)?
Yes, it remains dimensionally stable under normal storage conditions. However, high continuous heat – like in a hot trunk in midsummer – is not suitable for PLA; the box is not designed for that.


What are the tolerances in 3D printing?
Small tolerances are inherent to 3D printing. The cartridges still find secure hold in the slot – a minimal play remains due to design; pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose your capacity for 6.5mm Grendel – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is intended for organization and transport and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the legally required ammunition storage and has no ADR/UN dangerous goods approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; trademark and name rights remain with the respective owners.