Filamelt ammunition box / 6.5 PRC / 'folding / locking lid' / cartridge box, ammo box

Filamelt Ammo Box / Ammo Box
Ammo box for 6.5 PRC with flip/latch lid
The 6.5 PRC box brings order to your ammunition: caliber-specific slots, multicolor printed front & lid, Made in Germany. No loose cartridges, no collection of manufacturer boxes – a uniform look for your gun cabinet, shooting range, and hunting area.
The 6.5 PRC is fired from long guns.


✔ Made in Germany

✔ Dimensionally accurate 3D printing

✔ Caliber-specific fit

✔ Filamelt PLA+ 2.0

Own production in Westerwald · over 221 calibers in stock · no import goods

Does it fit my ammunition?


Caliber
6.5 PRC


Suitable for
Long gun


Fit
caliber-specific slots according to CIP standard dimensions; play and rattling minimized


All information according to official CIP data. If you notice an error, please let us know briefly.


Which size fits your 6.5 PRC ammunition?


Variant
Weight
For what


64 cartridges
371 g


Delivery without ammunition.


What makes the 6.5 PRC box special


Caliber-specific fit
Each slot is designed to the caliber according to CIP dimensions: the cartridges are held firmly, play and rattling are minimized as much as possible. Dimensionally accurate design, not improvised.


Hinge lid with latch lock
The lid is attached at the back via a hinge and folds fully backward – the cartridges then stand upright and ready to grab in the securely seated insert. A latch lock at the front keeps the lid securely closed during transport; to open, simply release the catch.


Stable & durable
Solid construction for continuous use – stable standing in the cabinet, well stored in the range bag, reusable instead of disposable packaging.


Caliber marking in multicolor print
The caliber marking is multicolor integrated directly into the box print – permanent, without stickers and without engraving. In a full gun cabinet, you immediately reach for the right box.


For sport shooters, hunters, and reloaders


Reloaders: one box per load (powder type, charge, bullet) – batch cleanly separated and clearly marked in multicolor instead of mixed loads.

Sport shooter: one box per discipline or firearm – defined quantity per box, ammunition count at a glance.

Organized stock: uniformly labeled in the gun cabinet, ready to grab for range, hunting area, and range bag.


Made in Westerwald

We print every box here in Westerwald – no container import, no anonymous mass production. Printing is done largely with solar power from our own 22 kWp photovoltaic system. Material: Filamelt PLA+ 2.0.


Other variants & complementary accessories

Also available for 6.5 PRC:


Slide lid (BBox) – space-saving, slides to the side instead of swinging open

Flip lid (ABox) – fully openable, cartridges openly ready to grab
Filamelt Reloading Board
Filamelt Cartridge Clip (caliber-specific)


Frequently asked questions about the 6.5 PRC box


Do my reload cartridges fit too?
The box is designed for CIP-compliant cartridges. Custom loads with longer overall length (long bullets, shallow seating depth) can be tight near the upper OAL limit – if in doubt, ask briefly in advance.


Does the lid pop open in the backpack?
No. A latch lock at the front keeps the hinge lid securely closed so it does not accidentally open during transport. To open, release the catch with your finger; the lid then folds backward. Slight manufacturing tolerances are possible.


Are the boxes suitable for transport?
Yes, as an organization and storage box for the range bag. However, it is not a safety container according to WaffG/AWaffV and not a hazardous goods packaging.


Can the box withstand heat (e.g., summer trunk)?
Yes, with usual storage it remains dimensionally stable. High continuous heat – like in a hot trunk
m in high summer – but that’s nothing for PLA; the box isn’t made for that.


What are tolerances in 3D printing?
Low tolerances are part of 3D printing. The cartridges still find a secure hold in the slot – a minimal play remains due to the design; pressure on the bullet nose is avoided as much as possible.



No more loose cartridges
Choose your capacity for 6.5 PRC – from the small box for the range bag to the large box for storage.


Important notes: Delivery is without ammunition. This box is for organizing and transporting and is not a safety container according to § 36 WaffG / § 13 AWaffV; it does not replace the required ammunition storage and has no ADR/UN hazardous materials approval. Please check suitability for your specific cartridge before use. Licensed design: CincinnatiDesigns. This product is manufactured under license; brand and name rights remain with the respective owners.